600mm TJ (CrMoly steel) with a custom high flow 485 marine brass barrel inlet. This barrel is match grade. Had to buy 3-4 blanks before I hand selected this one for my personal collection. 14.02mm OD will work with the Impact, Maverick, Wildcat, Crown, etc.
Chambered / throated the lead in with a 2 deg live-piloted reamer that I had custom made by PTG for the TJ's .30 bore/groove. Shoots obscenely well with a variety of ammo. 1/2-20 thread on the muzzle, bore was lapped and polished over 3 separate sessions with a slight taper (a few ten thousandths of an inch). I'll include some high BC 62 grain Varmint Knockers with this one.
Terms: 399 + shipping CONUS. No lowballers. Price is as firm as the barrel.
Chambered / throated the lead in with a 2 deg live-piloted reamer that I had custom made by PTG for the TJ's .30 bore/groove. Shoots obscenely well with a variety of ammo. 1/2-20 thread on the muzzle, bore was lapped and polished over 3 separate sessions with a slight taper (a few ten thousandths of an inch). I'll include some high BC 62 grain Varmint Knockers with this one.
Terms: 399 + shipping CONUS. No lowballers. Price is as firm as the barrel.
