Tuning Trigger help any tricks to dampen a loud trigger?

[Rustyshakleford]

Got my suppressed can on by silent thunder ordinance which is really keeping there company name true, now my on my Hatsan the loudest thing is the trigger I don’t have a chronograph so I can’t see my speeds I’m shooting it’s a .25 so I’m trying to keep the trigger fairly crisp and with that I’m getting a very hard thump on the trigger slamming the air (I imagine .I’m still learning ) Will a Quattro trigger fit in a synthetic flash bull pup stock ? Or is there another trigger that willl work with this rifle entirely ? i can’t seem to find any one to help in my area in Ventura Oxnard area California or even ppl that own pcps around here I don’t mind dremeling A bit of space out of the plastic stock but if it’s a pain in the orbital SpaceButt That’s a diffrent story .



any one have any tricks to dampen the sound of factory Hatsan flashpup Qe.25 synthetic stock trigger ? 

 

[Yo]

Absolutely has Nothing to do with the trigger.

That's an inherent ping resonance sound upon firing totally normal in the Flash pup.

Nothing's wrong with the gun.

https://www.airgunnation.com/topic/hatsan-flashpup-sounds-like-a-springerwhy/

 

[Yo]

https://www.airgunnation.com/topic/depinger-for-hatsan-flashpup/



OR spend $17.00 to $26.00 for a depinger you install in the air tube from eBay or cheaper places doing a search online to shop smart they are selling the same depinger. Or go hardware store buy cheap rubber grommets that fit snug in the tube yourself. ACE is the place.

 

[8thman]

The only bullpup that I’m aware of is the impact that does not have the action just below your ear. I have an Edgun that’s Louder to the shooter but for the others around me tell me that the impact sounds louder.

 

[Yo]

save money go to ACE Hardware and buy 2 or 3 that LOOK LIKE these only A LOT BIGGER to fit snug in air tube.

Or one of these whichever comes out cheaper and whatever you buy MUST fit snug in the air tube for them to work!

 

[Rustyshakleford]

I’ve seen those dePingers but there suppose to go on the end of the barrel then through the the suppressor ? I think I know what ya guys mean because the all the crap in the actual Qe end sumikar to a hair curler with w was of cloth around it there’s 2 “hair curlers in the end then also 2 clear plastic caps that look what look like spray bottle caps caps but thicker and there is a hole through them and they touch the barrel NUTT inside the barrel to keep everything right and tight that makes a lot of sense that that could be the cause 

 

[Rustyshakleford]

Oh I’m barley watching the vid now, u posted ur talking about inserting the gromet in to the actual air tank? Not in the end barrel ? Shoot good thing I already have it disassembled Had fixed my trigger button anyway safety problem lol 

noobs Mods and 3rd hand guns man....shiiiiit 
I like tinkering and making things better with crap tho 

 

[Yo]

Sounds like you are pretty good at self reengineering things better than what the factory had designed so I shouldn't have to worry about you then.

 

[scratchcoobster]

Yo,  LOL. Re-engineering, is simple. What could possibly go wrong??

 

[Rustyshakleford]

Re-engineering was the wrong word I meant modify things 

I worked in a guitar customs shop for a while but had been fixing thing since I was a kid 

not so much mechanical but mostly tube amplifiers and string instruments/electric 

 

[Rustyshakleford]

Hey yo go slip inside a Male butt hole on “accident” Ya fairy haha 

 

[Rustyshakleford]

Looked at lows and Home Depot employees don’t even know what a rubber grommet is let alone what it might be on FML HA GOING TO ACE TODAY LITTLE OUT OF THE WYA BUT SO BE IT, atleast last time I went every one I asked working at ace knew there stuff in there section 

places are going down hill 

seem like they fired all the older knowledgeable employees from Covid and Hired the do nothing say nothing but go Uuummmmmm maybe uhhhhmmmm try tools ..... yes ok there I’ll try a rubber gasket in The power “tools” Section lol I broke down and just asked customer service and they had them in stock but the only ones I could buy were on a pack of 1000 So like if ace doesn’t have it I’ll just get it online like everyone else lol I just didn’t want to wait 5 days to get it but oh well it’s been about that long by the time I’m gonna actually he able to do it and if I can’t find it today I gotta wait another 5 days anyway haha 

management told my stepdad to go home from Covid months ago he a pro fishmman and works at a shop for fun as he’s retired since he’s been gone for 2 months they sold 2 fishing poles his average was 4 a day lol on a slow day even fitting the first couple months of Covid didn’t seem to effect the fishing market on his side at all since he’s an older guy with medical preexisting medical conditions he probably took the right path . Now he just fishes all day anyway lol been retired for years anyway he doesn’t care either way he’s still getting paid lol these businesses are failing hard tho pretty sad 

 

[Vetmx]

Try auto parts stores. Tell them you need to look at wiring grommets. Also maybe try using some punctuation in your posts. My brain get out of breath with your long ass sentences.

 

[Parrotculler]

By the way, going back to your first post. Flash Pup already comes with a quattro trigger. Suggest to do yourself a favor: don't try to replace it ...

There are 3 set screws to tune it to a very sweet 2 stage. Go slow and easy, and take notes about your number of turns. 

But as said before, the ping and action noise have nothing to do with the trigger. The synthetic stock amplifies the normal action noise, just like the body/box of a guitar. It is the nature of the beast. You might be able to reduce it by filling up the butt with polyurethane foam. But I would not touch it frankly because PUR is an unholy mess.