Other Truth behind Macavity Arms Prototype Airgun
- Thread starter Airgun Advisor
- Start date
i emailed macavty but spread lead has ancered my question thanks so much only thing i proble need to cheak is the o/d of the guage on the ma2 the frount tube has a off set where the guage seting down ward the o/d if same will work but if i buy a gauage larger than stock it may not fit on frount of tube the back has clearencer
Upvote 0
its there basic 4 difrent threads 10mm 8mm 1/8 bsp and 1/8 npt is that pretty much all 4 sizes thanks mister lead you have been super help full
Upvote 0
on ebay the size differ on the o/d there is a 25.5mm o/d then there is a 23mm o/d and even the larger 28 mm o/d 
Upvote 0
Factory is 25mm on the tank gauge, clearance is so tight, I'm not sure you could get away with 25.5. Safe bet would be 23mm up front. Regulator gauge you could go 28mm if the size difference didn't bother you. Happy to help Gizmo!
Upvote 0
thanks for your help this is a very good site to get info from and good people to deal with your info helped a lot
Upvote 0
