I bought a refurb Seneca Eagle Claw and within a few weeks it started leaking. Took it apart and the screw was missing from the check valve, I fixed it and it's working but I'd like a replacement. Pyramyd Air sent me a Sumatra check valve, which when you look at the part on their website it's correct, but it's not that part it's totally different. PA sux for trying to get a person on the line. I love the gun and want to keep it I just want a new check valve so does anyone know where I could buy one? I call Air Venturi direct and their phone system put me through to PA tech dept where I'd have to sit on hold again.
Tuning Trying to find a check valve for Seneca Eagle Claw .22, striking out with PA
- Thread starter Pikey
- Start date
I would try Saddle Mountain,( Will Piat owner). He knows these guns inside and out. He also does power tuned, great guy talked to him a few times. He is very friendly and he should be able to help.
Upvote 0
I agree
The "we don't value your time" hold you get from many companies is frustrating and insulting.
With PA I have found email to be much more effective.
They have found numerous parts for me.
Even ones that are not pictured on line
Hope this helps
Ed
The "we don't value your time" hold you get from many companies is frustrating and insulting.
With PA I have found email to be much more effective.
They have found numerous parts for me.
Even ones that are not pictured on line
Hope this helps
Ed
Upvote 0
I don't have a eagle claw so I'm not sure if it is a Foster fitting like my Sumatra or a probe but I figured when I couldn't get the check valve to seal anymore I'd just replace the Foster fitting with a one way foster.
Upvote 0
Yes it does have a foster fitting and that's a great solution? So something like this below? Man if this works what a simple solution. I was at the point that if I couldn't get parts I was going to send it back
https://www.amazon.com/Outdoor-Guy-Connection-Foster-Stainless/dp/B07D51SPZX/ref=sr_1_1_sspa?keywords=foster%2Bfitting&qid=1652528668&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFSRFU0SDNLQ0wyT1cmZW5jcnlwdGVkSWQ9QTA2MTA0MjBBS1NISllDRDJJNlkmZW5jcnlwdGVkQWRJZD1BMDEyMTc3NDVESDVISERJUzhHViZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1
Upvote 0
Here's the problem I ran into with my Kral... Is it 1/8 npt, 1/8 BSPP, or some kind of metric size thread? I have both types sitting here, and neither fit in my Empire X.
Upvote 0
