What's everyone using for a filter setup with their tuxing double cylinder I'm ordering the txed011 model with the cage. Was thinking about mounting some desiccant filters to the cage.
Tuxing double cylinder compressor filter setup
- Thread starter anonymous_.457
- Start date
I have an 032 added a molecular sieve for no particular reason, don't have that much humidity here, but paranoia.
Upvote 0
Nice. How long have you had yours? I'm hoping there reliable from what I've seen they seen to be reliable
Upvote 0
A bit over 2 years, 20 hrs on it. Had the electronics take a dump immediately but they sent a new one, fun to install, been solid since. I use SECO Lube, great stuff, not cheap but worth it. They make sure you can't take your filters apart, they are torqued bigly. I drain the first one ever 5 min or so, just to bleed out the excess moisture, just a light crack on the valve does it.
Upvote 0
That's awesome man that seco lube is the best the higher the flashpoint of the oil the better it is for hpa compressors I'm using pureguard sae 30 air compressor oil from o rileys it doesn't have any detergent in it and no carbon build up it has a flash point of 536 F the seco lube is a tiny bit under that
Upvote 0
If the thing gets that hot, I've got other issues. Was using Royal Purple, what .....garbage, smoked like there was no tomorrow. Got dirty faster too.
Upvote 0
It won't get that hot the oil can handle that much heat..... the higher the flash point of the oil the better
Upvote 0