Two FX Indy questions...

[kmd1984]

1. Can you put a regulator in it!?

2. Is it available now, or is there a waiting period!?

Sorry guys. I know a call to AOA will answer these questions, but they are closed now, and it is impossible for me to wait until morning. : )

Thanks,

Kmd

 

[sniperlabyo]

No you can't Install a reg, it has a small air chamber the reg will take up that space. Plus the reg need a constant pressure to feed it to operate properly and you can't do that with a hand pump.

AOA has a used .30 cal but has broken stock 

 

[kmd1984]

That sucks about the regulator. Or doesn't it? LOL. I really don't know much about PCP rifles, getting my first ever on Friday (Marauder .25). I always that that the "better" and certainly more expensive PCP rifles have a regulator, so I was surprised to see that the Indy doesn't have one. 

I saw that one with the cracked stock. Are you saying that this is the only option to get one right away???

Thanks,

Kmd

 

[sniperlabyo]

Saying you can save hundreds.

Dont need a reg, you can used the pump to maintain a set pressure-----> you can shoot at 200b After the shot pump it back up to 200b takes about 2 or 3 pump. Your reg is your hand pump.

 

[T3PRanch]

The Independence is a full sized rifle.

The Indy is in Bullpup format.

Thurmond

 

[kmd1984]

"sniperlabyo"Saying you can save hundreds.

Dont need a reg, you can used the pump to maintain a set pressure-----> you can shoot at 200b After the shot pump it back up to 200b takes about 2 or 3 pump. Your reg is your hand pump.

T3PRanch is right, the one with the cracked stock is the Independence, not the Indy. Anyhow, good to hear that with the Indy you don't really need a reg since you have the pump build in...

Thanks,

Kmd

 

[kmd1984]

"T3PRanch"The Independence is a full sized rifle.

The Indy is in Bullpup format.

Thurmond

Thanks for pointing that out!

Kmd

 

[kmd1984]

Just one more thought...

I would have to look closer at a hand pump and at the Indy, but the first thought I had was: Why not build an aftermarket hand pump that you can attach to ANY rifle. Not one models that fits all, but by principal. It should not be that hard, from and engineering point, to convert a regular hand pump to one similar build into the Indy. Instead of "up and down", you add a lever and pump "in and out".

I know, it is a fantastic idea! LOL

Kmd