Found 603 but the seals need replaced.he has the seal kit he bought from Canada in2016 but never put it in. Said he would sell it to me kit, case & gun@ a reduced price and is a good one. I looked online and YouTube to see if there are videos of 603 seal replacement but didn’t find any. Hope I can find step by step instructions
TX200 convert to 10 meter rifle
- Thread starter Weihrauch
- Start date
601 among mugs.
When you need a lid on your beer mug, i assume so others can not spit in it.
You need new friends. here we drink our mead of curved horns, and dont need a bloody lid on it
When you need a lid on your beer mug, i assume so others can not spit in it.
You need new friends. here we drink our mead of curved horns, and dont need a bloody lid on it
Upvote 0
If doing yours, easy if mechanically inclined, the following information in reply to another member May be helpful.
Atkins57 said:
“has noticeable air loss right at the end of the stroke when I open the charging handle.”
Draws air on the opening stroke, will hear suction at end of stroke, normal. Compresses air on closing stroke. Light effort, maybe 16-17 lbs pull. Light poof on discharge with no pellet loaded, again normal.
Do not put any combustible oils or fluids into compression chamber (per manufacturer), pressure sufficient to induce dieseling and damage rifle. This is highlighted in red in a strongly worded warning addendum in manual.
Manual available online from Feinwerkbau.
NIKKONOS on eBay is excellent and trustworthy resource for parts, also has website: targets.ca
Parts Diagram:
https://www.feinwerkbau.de/ceasy/modules/core/resources/main.php5?id=543-0
Atkins57 said:
“has noticeable air loss right at the end of the stroke when I open the charging handle.”
Draws air on the opening stroke, will hear suction at end of stroke, normal. Compresses air on closing stroke. Light effort, maybe 16-17 lbs pull. Light poof on discharge with no pellet loaded, again normal.
Do not put any combustible oils or fluids into compression chamber (per manufacturer), pressure sufficient to induce dieseling and damage rifle. This is highlighted in red in a strongly worded warning addendum in manual.
Manual available online from Feinwerkbau.
NIKKONOS on eBay is excellent and trustworthy resource for parts, also has website: targets.ca
Parts Diagram:
https://www.feinwerkbau.de/ceasy/modules/core/resources/main.php5?id=543-0
Upvote 0
Thank you . Yes , been machinist since 1985, been in tool & die shop for past 14 years. This will be fun.
Upvote 0
You will be very happy with that. I have a 601 and it’s a hell of a rifle. Once you start shooting it at 10M you will understand the TX200 will never be able to be made to do what a 603 will do.
Upvote 0