TXED012 Purchase

[OldVet]

I getting close to making this purchase , and I wanted to make sure that my purchase is a good one. I'm planning on this Tuxing compressor purchase from eBay which includes an extended warranty purchase as well. Is there anyplace else I should consider.
I need particular twin machine to fill my 6.8 liter fill station , it will do it in appointmently 46 minutes. Then the air station will fill my 500 cc bottle on my Zelos many times. I've been without a compressor for over a month now , and I will be getting this new compressor , and air station at the same time. I've been shooting my multi pumps the .22 Drifter , M4 .177 , and the 392PA. I'm excited to get back to the PCP game.

 

[SpindleB]

I think the dual filters on the txedm042 are a good upgrade. The first filters the moisture the 2nd cleans and dries the air.

When I top off the 9L I open the drain on the moisture side and water always comes out. I live in the Bay Area and we do not have humidity.

So if your area has humidity those dual filters will really be useful.

-- Matt

 

[OldVet]

Matt I hope you are still here.
I just found a TXEDM041 it's a little bit different , but has 35 min fill rate for the 6.8 L. I was going to buy the filter at Walmart anyway , and I live in Tucson.
It is winter now , but mostly hot dry air here I'm going to upgrade the water pump right away.

 

[SpindleB]

I think the difference is the 042 has automatic shut off. Not required but I like not having to watch it fill.

I also put a large gauge inline.
I'm pretty sure I have all the parts for at least one more using an analog guage.

Give me a few minutes and I'll wrangle the parts.

 

[OldVet]

I think the difference is the 042 has automatic shut off. Not required but I like not having to watch it fill.

I also put a large gauge inline.
I'm pretty sure I have all the parts for at least one more using an analog guage.

Give me a few minutes and I'll wrangle the parts.

View attachment 539279

The 012 has auto shut down as well ,but not the filters. This new 041 is manual shut down , but I'm going to be right there anyway.

 

[SpindleB]

Yeah, my parts bins have everything for an inline large gauge. You would need to tape and seal the connections. Everything is NPT but the ends are quick disconnect. You just plug the pump outlet hose in one end (has male QD) and connect the other to whatever you are filling (has female QD). I mounted mine to the wall.

I can't read the gauge on the pump when it is running so I added one i could read that wasn't vibrating. MUCH BETTER.

send me your address in PM and I'll send you the parts. I haven't touched any of these in a year, at least.

 

[OldVet]

My AI just did some math for me.
Says if I fill a 6.8L tank to 4,500 psi
I can fill a 500 cc bottle to 4000 psi
15 times.

 

[SpindleB]

Nope, every time you fill the pressure in the 6.8 drops. So the next fill starts where the last fill left off. Not too long before you are at 3500 on the 6.8 and probably should top off to 4500 again.