Umarex 1250

[houston]

Hello fellow airgunners...

I have a Umarex 1250 Pcp. I went to fill yesterday and the cylinder wouldn't hold air. How does one open the cylinder up and replace oring?

Thanks

 

[UCChris]

Best I can tell, the air cylinder is threaded onto the action. Please make 101% certain the cylinder is empty before trying to disassemble.

 

[silvershooter589]

Is air coming out the barrel when you pump it? Have you tried cocking it with the barrel facing up before trying to fill it?

 

[houston]

Air cylinder dosen't have a fill hole. You need to remove it from tifle each time for filling.

 

[iAMzehTOASTY1]

Is air coming out the barrel when you pump it? Have you tried cocking it with the barrel facing up before trying to fill it?

Is that a thing?
I've always filled mine barrel up bc the gauge is in line with the barrel*snowpeak pp800r

 

[UCChris]

Is that a thing?
I've always filled mine barrel up bc the gauge is in line with the barrel*snowpeak pp800r

Sometimes, when filling from empty, the poppet won't seal right away. Cocking the rifle and using gravity can help the poppet seal. If the gun already has air in it, this doesn't matter.

 

[iAMzehTOASTY1]

Sometimes, when filling from empty, the poppet won't seal right away. Cocking the rifle and using gravity can help the poppet seal. If the gun already has air in it, this doesn't matter.

Thanks for that info!