Umarex Notos Budget to Gucci build

That’s what I’ve been reading bout them just tryna figure out where to start.
Parts are on eBay by c88machineing. Get the 500mm barrel kit. The barrel is sold separately I got mine from Utah airguns I got the stx superior. I would skip the plenums he sells and just get the huben power dream notos regulator and get a carbon bottle from amazon. As far as porting goes that's your discretion I'd recommend staying at 4mm as going larger requires more modifications and drill the port out by hand I just put the drill bit in my tap handle. Everything I've done I picked you from these forums. The info is out there. I come from building custom 2240s so none of this was really new just different.
 
  • Like
Reactions: 209airgunner
Parts are on eBay by c88machineing. Get the 500mm barrel kit. The barrel is sold separately I got mine from Utah airguns I got the stx superior. I would skip the plenums he sells and just get the huben power dream notos regulator and get a carbon bottle from amazon. As far as porting goes that's your discretion I'd recommend staying at 4mm as going larger requires more modifications and drill the port out by hand I just put the drill bit in my tap handle. Everything I've done I picked you from these forums. The info is out there. I come from building custom 2240s so none of this was really new just different.
Thanks appreciate it sounds simple enough definitely gonna give it a try and post my journey on here
 
That’s what I’ve been reading bout them just tryna figure out where to start.
C88 machining has a website now here are some links to get you started



Hope this helps
 
C88 machining has a website now here are some links to get you started



Hope this helps
Much appreciated!
 
  • Like
Reactions: joe9090
C88 machining has a website now here are some links to get you started



Hope this helps
dang it , blocked again by stupid Illinois & eBay rules, i tried to buy then trigger kit, no go..also tried to order a spare fill probe, again no go..
 
does the trigger kit really help the vagueness of the Notoes trigger?
 
  • Like
Reactions: joe9090
does the trigger kit really help the vagueness of the Notoes trigger?
i do not know i, i just read the thread yesterday & tried to buy it & got blocked , the way i see it is it has to be an improvement over the stock trigger , at least i would hope so..BTW, i purchased a nice cocking lever for the Notos from a member on AGN , a couple of weeks ago , have not installed it yet..
 
  • Like
Reactions: jarmstrong
does the trigger kit really help the vagueness of the Notoes trigger?
I ordered one but I haven't installed it yet. I tried taking that screw out before and it was about to strip out the Allen head so I stopped. I'm going to have to put some heat on it as it's probably loctited.
 
  • Like
Reactions: RAMJET66