I have a fantastic shooting Uragan 2 in
.30 cal. Rifle comes with what you see plus:
AGT Uragan 2 .30cal 700mm unchocked CZ barrel
AGT moderator
Africa Air Ordance Uragan Upgrade Kit
- Heavier hammer weight
- Red anodized biathalon cooking handle
- bottle adapter for accepting bottles w/ M18-1.5 thread
- Depinger for plenum
Arken Optics SH-4 4-16x50mm GenII scope
Red anodized scope rings with bubble level
Red laminate stock
Adjustable bipod
(4) Carm .30 mags in Red
(1) Custom OEM mag that will hold 62gr or larger ammo up to 13mm in length
Fill probe
Original OEM bottle
Original fill gauge
Gen 2 Sekhmet digital gauge with charger (not pictured)
Allsafe 700cc bottle
Custom 7075 aluminum gauge adapter
I have tried to get as much matching in red as possible. I do not have the original barrel shroud. Barrel is tensioned and i machined a custom black UHMW adapter at receiver side with lip machined for an o-ring to snug nicely against reciever. Moderator has small lip machined for carbon fiber sleeve to fit snug between moderator and adapter. The moderator has a textured red faux carbon fiber overlay. I machined an adapter out of 7075 aluminum to offset the digital gauge just enough so it would thread in as much as possible while avoiding the rifle body. There is no way to add a larger gauge to this rifle unless something like this is made. Rifle holds air, ZERO leaks and shoots great. One OEM mag was modded with .5mm CF to allow more internal room for longer projectiles.
The only issue is one of the barrel clamps on action has broken off as seen in 2 pics. I probably could have engineered a fix but I tested it and it has continued to shoot fine since. This has not affected accuracy and I have not noticed any difference while shooting, especially near my face. I have shot it a few hundred times since the one clamp broke and would continue to shoot it more. The barrel is held with (4) more screws over the cocking portion of the rifle. In total there are (8) barrel screws with (2) now missing. This is my last pcp rifle as I have transitioned to break barrel type rifles. So I am offloading a compressor as well. This rifle LOVES 62gr slugs. I replaced o-rimgs & resealed everything about a month ago with Krytex grease. I am asking $900 FF obo shipped for everything. Please feel free to ask any questions! Thanks!
.30 cal. Rifle comes with what you see plus:
AGT Uragan 2 .30cal 700mm unchocked CZ barrel
AGT moderator
Africa Air Ordance Uragan Upgrade Kit
- Heavier hammer weight
- Red anodized biathalon cooking handle
- bottle adapter for accepting bottles w/ M18-1.5 thread
- Depinger for plenum
Arken Optics SH-4 4-16x50mm GenII scope
Red anodized scope rings with bubble level
Red laminate stock
Adjustable bipod
(4) Carm .30 mags in Red
(1) Custom OEM mag that will hold 62gr or larger ammo up to 13mm in length
Fill probe
Original OEM bottle
Original fill gauge
Gen 2 Sekhmet digital gauge with charger (not pictured)
Allsafe 700cc bottle
Custom 7075 aluminum gauge adapter
I have tried to get as much matching in red as possible. I do not have the original barrel shroud. Barrel is tensioned and i machined a custom black UHMW adapter at receiver side with lip machined for an o-ring to snug nicely against reciever. Moderator has small lip machined for carbon fiber sleeve to fit snug between moderator and adapter. The moderator has a textured red faux carbon fiber overlay. I machined an adapter out of 7075 aluminum to offset the digital gauge just enough so it would thread in as much as possible while avoiding the rifle body. There is no way to add a larger gauge to this rifle unless something like this is made. Rifle holds air, ZERO leaks and shoots great. One OEM mag was modded with .5mm CF to allow more internal room for longer projectiles.
The only issue is one of the barrel clamps on action has broken off as seen in 2 pics. I probably could have engineered a fix but I tested it and it has continued to shoot fine since. This has not affected accuracy and I have not noticed any difference while shooting, especially near my face. I have shot it a few hundred times since the one clamp broke and would continue to shoot it more. The barrel is held with (4) more screws over the cocking portion of the rifle. In total there are (8) barrel screws with (2) now missing. This is my last pcp rifle as I have transitioned to break barrel type rifles. So I am offloading a compressor as well. This rifle LOVES 62gr slugs. I replaced o-rimgs & resealed everything about a month ago with Krytex grease. I am asking $900 FF obo shipped for everything. Please feel free to ask any questions! Thanks!
