Vevor - Missing Cylinder Head Part???

[Spike2403]

I was given this Vevor

pcp compressor by my neighbor to look at/troubleshoot/fix. He told me it did NOT build pressure; however, I found it didn't even have any air flow. I took it apart and quickly saw that a "part or piece" was missing from the top of the cylinder head. Can anyone tell me what part I need? Tried searching for a parts diagram - found nothing. Unit powers up, fans run and compressor functions, but obvious that air is escaping out of this threaded hold. Any help would be appreciated. I'm new to pcp - on my 3rd day!

 

[Hateful McNasty]

Not that i know , but looking at cylinder heads i see 3 things . A plug , aGuage, or a line to somthing used.

Got a plug, try it... Got extra Guage try it .
Do you see another part that may take a line ?

Send vevor a email.

Of course any of my advice is a at your own risk disclaimer..

 

[ThomasT]

I would send Vevor a question. I sent them an email with a question and got a reply a day later.

ThomasT

 

[jarmstrong]

where is paul harvey and the rest of the story,,, your neighbor has more to tell you. what happened the the outlet check valve and outlet piping that goes to the hose on the outside of the compressor? where did it all go???

 

[Hateful McNasty]

Ya, id take good pictures and email vevor.. like tom said these companies do try to help . Heck they may even send you the parts needed..

 

[Gerry52]

IF that Vevor is like other compressors that hole on top is missing the high pressure air output piping. That might be a big IF as I'm not familiar with the Vevor. It's probably not building pressure as air is just blowing out the top of the HP cylinder. Google "exploded diagram" of that model, you might find what you're looking for.

 

[Hateful McNasty]

IF that Vevor is like other compressors that hole on top is missing the high pressure air output piping. That might be a big IF as I'm not familiar with the Vevor. It's probably not building pressure as air is just blowing out the top of the HP cylinder. Google "exploded diagram" of that model, you might find what you're looking for.

If its out there i could not find it. Or any like model to look at..lol. If you find it post it.. thanks

Also no lets look under the hood reviews in any of this stuff..

 

[Gerry52]

I looked too. Weird how little info is out there. I saw an ad that said it was model SG-220V-110V-12VMC. Hope that helps. Vevor makes a number of types of compressor. Maybe contact them directly.

 

[Hateful McNasty]

I looked too. Weird how little info is out there. I saw an ad that said it was model SG-220V-110V-12VMC. Hope that helps. Vevor makes a number of types of compressor. Maybe contact them directly.

I was thinking the same.

All the forum repair woketube or whatever posts or reviews, anything just ='s a lot of nothing

 

[AmosBurton]

I'm sorry I didn't see this on Thursday. I just had mine apart to replace the pressure gauge.
If you can't get an answer let me know and I'll take the 50 screws out and have a look for you.

I will also say Vevor is good about responding to questions. Just give them a few days.

 

[willy]

Is the hole threaded? normally that high pursuer.

 

[greg1978]

Wow, just got mine today, runs great but I'm also going to have to contact Vervor as I'm missing the air intake filter and hose!! Dang, what is it about these companies and their quality control...