Vulcan 3 airleak from fillprobe

[GeminiRx]

Hi everybody,

Long time reader but now part of the community.

Ik just picked up a brand new AGN Vulcan 3 and went on te filling it up. Once the the fill pressure was reached I went to bleed of the air line.
Something inside the gun did not close or is sealed because the pressure was leaked out to 0.

I did try firing the gun at pressure and when Emory.
The bleed screw at the bottom is closed off.

Anybody with some advise?

Pat,

 

[Scotty1]

Did you bleed quickly? If you bleed slowly, the valve may not close.

 

[GeminiRx]

Did you bleed quickly? If you bleed slowly, the valve may not close.

Hi, thanks for the reply
Yes I tried that.
I am disassembling it.
Somebody told me there a little torx screw inside the block that should not be loose.

Will keep you updated

 

[Scotty1]

Good luck, you can do it!

 

[GeminiRx]

I tightened the screw, problem solved

 

[Scotty1]

Very nice, well done!

 

[Emu]

What Cal and length is your Vulcan 3?

 

[GeminiRx]

What Cal and length is your Vulcan 3?

It's a .22 700

 

[Emu]

It's a .22 700

Please share groups and experience !!