Tuning Vulcan 3 Long. How to take out all air preassure.

[Emu]

I need to take out thenregulator of my Vulcan 3 long. 30 Cal in order to check what could be wrongnwith the regulator. 

I know it has a screw perfectly identified to take out the preassure of the the bottle.

What I do not know and would appreciatenyour help is how to take out the preassure in the plenum after having lost all preassure of the bottle.

I will appreciate your advice. 

 

[KatoKevin454]

Dry fire it after degassing it, if air is still in the plenum dry firing will remove it. it won't hurt the gun to dry fire it.

 

[Emu]

Already changed the o'rings of the regulator and I am re-filling the rifle.

If problem of changes in fps and accuracy is not fixed, then I will have to buy a Huma Regulator.

Let's see what happens. I will reporte. 

 

[Emu]

Apparently the problem of variation of fps among shots was fixed. 

 

[Peashooter]

My vulcan 3 bleed itself all dry just opening the bleed screw, so i have never dry fired it after that.

I am going to shoot it on Sunday and i am going to use the chrono a lot to see if i can find a sweet spot for a pellet.

 

[Emu]

I have not reach yet the power I want.

I disassemble the rifle again and gave more pressure to the plenum. Let's see what power it gives now.

 

[Emu]

I already had to order a Huma regulator for my Vulcan III .30 Cal.

The one that came with the rifle did not work at all.

 

[Peashooter]

I already had to order a Huma regulator for my Vulcan III .30 Cal.

The one that came with the rifle did not work at all.

Dang.



My Vulcan 3 the plenum pipe was made wrong ( location of breather hole ), and as a consequence the gun was assembled without the reg spacer ring.

Unless a sub 12 have another setup but i dont think so.

These are not inconsequential errors,,,,, i worry for AGT