leave out steps 3 and 4. The back "notch" is only if you want to lock the bolt open to remove the magazine or lock the bolt back for other purposes. Hope this helps answer your question.
Upvote 0
Vulcan stock
- Thread starter hawken54
- Start date
yenniedn,
i don't want breathe that lead dust. I tried to PM you but it won't go through for some reason. Can you PM me contact info for DonnyFL?
i don't want breathe that lead dust. I tried to PM you but it won't go through for some reason. Can you PM me contact info for DonnyFL?
Upvote 0
yenniedn,very nice,but can't help thinking the best parts have been cut out.The grain running into the butt is really nice.
Upvote 0
Mine is not a beauty as well. Has sweet scope with custom wheel, and silencer. Switched bolt action to other side.
Upvote 0
I would never buy a gun in that price range that has a wood stock without the dealer sending me a picture of the actual gun I am getting. I have had several dealers accommodate that request, only one refused. The one that refused said that if they showed everyone pictures they would end up with nothing but guns with crappy stocks.
Upvote 0
Hi, my name is Rob and i receive my first PCP this week, and the addiction begins!
Vulcan 25 lefty
Vulcan 25 lefty
Upvote 0
Thanks KYAirgunner, I guess I got lucky.
Can someone please tell me what the secret is to removing the front cover off of the barrel shroud. I purchased a shroud extender to help quiet the vulcan down and trying to get shroud cover off with out F-ing the shroud up.
Can someone please tell me what the secret is to removing the front cover off of the barrel shroud. I purchased a shroud extender to help quiet the vulcan down and trying to get shroud cover off with out F-ing the shroud up.
Upvote 0
It is not lock tited or epoxied (at least mine was not). I just inserted the tips from a pair of snap ring pliers into the holes and twisted left...screwed right off.
Very nice stock...you may have mine beat...congrats
Very nice stock...you may have mine beat...congrats
Upvote 0
Yeah, as I said, not nearly as nice as the Daystate stocks I've had. Wish the grain was better distributed throughout on this Vulcan.
Upvote 0
Thanks AJ3, I got it off. I thought there may have been a special trick to it, just had to use a little more strength.
Upvote 0
Must agree, bullpups work so much better with synthetic. Someone needs to buy one and finish it with the same coating as a PLB Colibri.
Can't say I'm a massive fan of the Vulcan's asthetics anyway, they've managed to recently produce a bullpup that looks like it was designed 20 years ago.
Upvote 0
What is ugly and old looking is the stock, both the design and the unimpressive wood that they use. Bullpup makers should have that craftsman Vit guy supply all their stocks based on what they charge for the pups these days. If AA can put the wood they do on a $650 TX200 springer the pup makers sure as heck could too.
Upvote 0
I'm a self-confessed weight-weinie, so am constantly looking for less weight to carry up the mountain. I agree with you, MrAirgun, that synthetic, specifically carbon-fiber, is the obvious choice for a bullpup design. I mentioned this to Tony Belas a couple of years ago (long before the Pulsar) and his response was that they tried it but didn't like the aesthetics. Looking at the aesthetics of the Pulsar I have to wonder about his definition of the term, but then beauty is always in the eye of the beholder. I, on the other hand, think carbon-fiber weave is beautiful in a tactical way and observing all the folks who're wrapping the shrouds with carbon-fiber tape, I'm not alone. You could design a beautiful carbon-fiber bullpup stock that would weigh mere ounces! Just not sure why none of the high-end builders haven't explored this.
Upvote 0