Warrior/Yong Heng Compressor Mod

[MddogHutty]

Hi guys i would like any feedback if anyone has done this same type mod on there yong heng and if indeed it keeps the water cold and circulated. Plus the steps you had taken to wire it up has i would be a novice doing anything like this has this is my first compressor. Here is a pic of the setup i mean from a computer. Radiator and 2 fans so the fans would just need wiring up. Has the small pump would run the water through the radiator and then into a small water container with pump. 

 

[Glem.Chally]

Probably needs a way bigger reservoir.

 

[Centercut]

Here’s a project I did a while ago...

https://www.airgunnation.com/topic/tuxing-double-cylinder-pcp-air-compressor-taking-the-plunge/

 

[molder]

seems like more trouble than its worth considering your not going to be filling for long periods of time with a yong heng

 

[biohazardman]

I got all the parts to do that using two 3 fan radiators though. Then I figured out that the longest I would possibly need to run the YH was 12 minutes. So I just freeze a half gallon milk jug or a couple of 20oz soda bottles full of water and drop them in my smallish two gallon reservoir. I will use the parts on my next computer build so no big loss.

 

[Eaglebeak]

A waste of time money and effort. If your bucket of water gets too hot, change the water or get a bigger bucket. What could be more efficient and simple than that?

 

[airgunfans]

For your reference someone has already done it : 

https://www.youtube.com/watch?v=S1t9xP2aagQ

 

[bandg]

I use a tool box with hoses ran through the lip and the pump attached to the bottom. Return line above water allows flow to be monitored visually. Holds probably a gallon and a half or a bit more. Fill it with ice/water and run. If weather is hot I've had to add ice a couple of times. It has never been a problem for my Great White top offs but a self contained unit that can just be switched on would be more convenient without doubt.

 

[MddogHutty]

Hi guys i come up with a self regulating system with an old heater fan took the element out so it now just blows cold air. Then added a 8x6" self seal clear box with the pump inside topped up with cold water drilled 2 holes for the tubes then added inside a 4x4" clear box filled with water and froze in the freezer. So on start up i would put the 4x4" box filled full with ice inside the 8x6" to keep the temperature down during running. I wasnt sure if it woukd work but running it started at 18.6c and went down to 17.5c so it seems to work but will have to see what its like from filling a bottle. So ill keep you all posted.

 

[MddogHutty]

Hi guys I had a query on converting my standard yong heng to a pressure release stop surfing and gave me the advice needed just need to know i could do with him telling me which wires go where has I'm not an electrician I cannot read the electrician schematic but I can follow a How to which colour go where if that's possible. Anyway I found a link to the items he told me I needed here is the links:

https://m.aliexpress.com/item/32931550071.html?trace=wwwdetail2mobilesitedetail&gps-id=platformRecommendH5&scm=1007.18499.139690.0&scm_id=1007.18499.139690.0&scm-url=1007.18499.139690.0&pvid=5ca78dd1-de6e-4705-8bd7-cffde173fad8&_t=gps-idlatformRecommendH5,scm-url:1007.18499.139690.0,pvid:5ca78dd1-de6e-4705-8bd7-cffde173fad8&spm=a2g0n.detail-amp.moretolove.32931550071&aff_trace_key=&aff_platform=msite&m_page_id=1612amp-FSe6YLH_XyP75Fu-iRDtUA1572627885461