Water Cooling - Order of things

[Bramezy]

So ive bought a radiator and fan and setting up to try and make the Yong Heng all contained on a cart and make cooling better.
But im not sure which way to plumb things.
Do you go hot water out of the compressor into the radiator and then into the tank an then back into the unit?
Thanks

 

[Stubbers]

Ideally your radiator would be set up to exchange heat from the return of the YH. So what you have in mind should suffice.


-Matt

 

[Rodeo]

Make sure that the water flow is in at the bottom of the YH cylinder and out at the top. This will help keep any air bubbles from getting trapped inside. If you are making it a closed loop system a bit of Water Wetter will help keep the water from getting "funky".