anyone know the specs of the barrels being sold on pyramid air by weirauch for the hw110s?
Tuning Weirauch barrels for HW110s from pyramid air
- Thread starter Ravenairgun123
- Start date
Seems like it's just a replacement barrel since it doesn't come with the pellet probe. Kinda pointless if you ask me. I don't think it's meant as a caliber change unless the description they put up is wrong.
Upvote 0
I have a 400 mm barrel in .22 this one is a 30.5 in barrel ...longer barrel increases velocity mine comes in Tuesday I'll post picture definatly not ment as a caliber change anyone needs help removing there hw 110 barrel lmk
Upvote 0
If you could confirm the length of the actual barrel, and see if it's threaded, that would be great. Thanks!
Upvote 0
Wow totally disappointed from pyramid air. First off upon receiving the parcel it came with a hole in the box. After opening the already opened box and examining the barrel it was obvious they removed this barrel from a old hw 110 threw it in the box and shipped it to me. The front of the barrel had a huge gauge on the face of the moderator and matching vice grip impressions on the opposite shaft of the barrel. The threads were covered in old crusty lock tight that the factory puts on the barrel to keep it from unthreading once attached to the gun. Inside of the barrel was greasy and dirty as if it been used. And on top of it all the barrel wasn't even 30.5 inches that they told me it was but only 2 feet. Check out these pictures of the barrel I got for $400 CAD absalute joke
Upvote 0
Wow totally disappointed from pyramid air. First off upon receiving the parcel it came with a hole in the box. After opening the already opened box and examining the barrel it was obvious they removed this barrel from a old hw 110 threw it in the box and shipped it to me. The front of the barrel had a huge gauge on the face of the moderator and matching vice grip impressions on the opposite shaft of the barrel. The threads were covered in old crusty lock tight that the factory puts on the barrel to keep it from unthreading once attached to the gun. Inside of the barrel was greasy and dirty as if it been used. And on top of it all the barrel wasn't even 30.5 inches that they told me it was but only 2 feet. Check out these pictures of the barrel I got for $400 CAD absalute joke
That is a huge bummer, I'm sorry for the lousy experience at PA. Sounds like these should be labeled as pull-offs and sold for $100!
Could you please measure the length of the barrel from the moderator to where the taper begins (basically, the visible section section of the barrel that is full diameter)? Also, are you able to measure the diameter of the barrel?
Thank you!
Upvote 0
Something smells! Have you got on the phone to Pyramyd? They sure ought to make it right or they have some 'splainin to do!
Upvote 0
Yikes. Could it be a mistake? Please check and keep us posted.
I had actually glanced at those thinking new HW barrel and remembering back when Tim sold full length blanks for under $100. They were my barrel of choice and while these are already fitted for something else and and would need cut for my purpose the price was a bit high for a gamble.
I recall aoa selling off old inventory LW take off barrels for around $30.00, advertised as exactly what they were & excellent for projects (maybe a Crosmam Pistol or such). Regardless of price if these are take off's it does need to say so in the advertisement Note there was a reason for aoa to pull & sell an entire batch of barrels.
John B .
I had actually glanced at those thinking new HW barrel and remembering back when Tim sold full length blanks for under $100. They were my barrel of choice and while these are already fitted for something else and and would need cut for my purpose the price was a bit high for a gamble.
I recall aoa selling off old inventory LW take off barrels for around $30.00, advertised as exactly what they were & excellent for projects (maybe a Crosmam Pistol or such). Regardless of price if these are take off's it does need to say so in the advertisement Note there was a reason for aoa to pull & sell an entire batch of barrels.
John B .
Upvote 0
Ya they offered to reimburse me for the shipping to send it back then there going to send me a new one and gave me $10 bulls eye bucks lol wanna say bs bucks haha.
They trying to say it was damaged in shipping but I mean why is there crusted thread lock on it... looks like vice Mark's on the barrel shaft too.
I was originally told the barrel without silencer is 30.5 inchs or 700 mm but the full length was 24inchs from end of threads to tip of moderator.
I dont have a proper tool to measure diameter but compared to the stock barrel a jsb jumbo heavy fits loosely and were it fits snug in the stock you want pictures of rifling it creates on the pellet?
They trying to say it was damaged in shipping but I mean why is there crusted thread lock on it... looks like vice Mark's on the barrel shaft too.
I was originally told the barrel without silencer is 30.5 inchs or 700 mm but the full length was 24inchs from end of threads to tip of moderator.
I dont have a proper tool to measure diameter but compared to the stock barrel a jsb jumbo heavy fits loosely and were it fits snug in the stock you want pictures of rifling it creates on the pellet?
Upvote 0