Well the 2 Tuxings never could build pressure.So i got the back up out

[willy]

Was a young Hen clone Vevor it say Young Hen on the manual. So run it last year for about 10 munites,boy it jumped up their"so put it away back in the box.So could,nt get the 2 Tuxing to work.So got the Vevor out" could,nt belive it" God says your screwed" same as the others. Did the soap test,opened it up thought something might be stuck? nope all good. Im trying to figure out what i did wrong to deserve this?Well it looks pretty up on the drier" O" spell police go easy on me iv had a rough 2 days"""I might have 2 ask Toasty1 to pray for me 2.

 

[BluegrassBill2020]

willy,
I Could not understand the problem you are having with the Vevor. Not building pressure? Leaking? or what? The oil you are using can have a big impact on the machine. When you say "opened up" what did you open? These Yong Heng types are very easy to work on. There are many tear down video's on YouTube using basic hand tools. More info please. Bill

 

[BluegrassBill2020]

willy,
Blown anti blast/explosion disc or carbon grit under the second stage piston anti back flow plate. Bill

 

[willy]

I might have had 30min. on the Vevor.Yes i took the head off checked the rings on the high end side and took the spring out and dish out like new,checked the burst disk OK. Those little box compressor on e-bay for $150 bucks are they good for 20 or 30 hours?

 

[Trucker3573]

I’ve been told long periods of inactivity are bad on compressor orings and piston seals.

 

[beerthief]

i would buy a rebuild kit , if that works buy another for 2nd compressor , maybe another kit for the velor too . Myself i would do the 2 YH's same time then the vevor ?

 

[BluegrassBill2020]

willy,
I presume You soap tested the air hose fittings, Air control valves, Pressure gauge and Stainless pipes under pressure? If the piston rings are bad/ ring gap misaligned it would pressurize the lower end. Just throwing ideas out there. Bill

 

[KatoKevin454]

if all 3 compressors cannot build pressure I would say it's not the compressors, it's what you are trying to fill or something in between, what are you using with all of them that is the same, to test compressors, use the test plug, if they go to 4500psi, they're good, maybe plugged filter. bad O-ring on filter, gun, fill probe.

 

[willy]

if all 3 compressors cannot build pressure I would say it's not the compressors, it's what you are trying to fill or something in between, what are you using with all of them that is the same, to test compressors, use the test plug, if they go to 4500psi, they're good, maybe plugged filter. bad O-ring on filter, gun, fill probe.

yEP" USED THE DEAD HEAD(.I think God is telling me (go back to spring guns my son)

 

[BluegrassBill2020]

willy,
If going back to Break Barrels, Get a boat, You have 3 good anchors. I wouldn't give up just yet. Let your brain relax and then think it through. Bill

 

[KatoKevin454]

yEP" USED THE DEAD HEAD(.I think God is telling me (go back to spring guns my son)

Wow, that is incredibly bad luck, I hope the problem is a simple one to fix.
good luck