I just put in an order for a Lelya with the intention of shooting it in the backyard. It has a moderator installed already, but I'd like to make it as quiet as I can. I see that EDgun produces a Bat moderator, so that's one option. I also came across (and lost the link to) 3D printed inserts. Given the off-center shroud configuration of the Lelya, are these my only options?
What are my options for further suppression of an EDgun Lelya?
- Thread starter OatmealMu
- Start date
Bat moderator is all you need to tame the muzzle blast. But there is a ping as well which is hard to fix.
Upvote 0
The BAT moderator would be your best bet but they're very hard to find. Eaglevision also makes an adapter that would allow you to add your own mod:
eaglevisioncam.com
EdGun Matador R5 R5M Lelya 2.0 1/2 UNF Off Set Moderator Adaptor | Eaglevisioncam
Description: Fits: EDgun Lelya 0.2, EDgun Matador R5 (all the models) and EDgun Matador R5M (all the models) Fits: 177, 22, 25 and 30 calibers Please follow this guide, to ensure correct installation. 1. Remove the front securing ring and the O-ring from the end of the moderator. 2. Extract the...
eaglevisioncam.com Upvote 0
There’s also an EagleVision adapter that allows you to affix other threaded moderators to the Lelya. https://eaglevisioncam.com/shop/mod...-lelya-2-0-1-2-unf-off-set-moderator-adaptor/
Upvote 0
Agreed, I just received a "Bat" suppressor from Utah Airguns the other day. Still a bunch of money for a piece of tubing and a piece of molded plastic, but MUCH better than the full price !
BIG step in quieting the Lelya (2). All I hear now is the mechanical noise from the receiver.
The "blem"...is no big deal. At least on mine, it looks like a bunch of the tubes were in a box together, with no protection. Leaving minor scuffs. None through the surface finish
Mike
BIG step in quieting the Lelya (2). All I hear now is the mechanical noise from the receiver.
The "blem"...is no big deal. At least on mine, it looks like a bunch of the tubes were in a box together, with no protection. Leaving minor scuffs. None through the surface finish
Mike
Upvote 0
Ended up going the blemished route. I agree that any damage is minor. Was expecting scratches through that anodizing, but I see nothing of the sort.
Upvote 0
Well they had some ... I just bought one so that leaves me with two. Considering grabbing another one as they are great units.
Also have one of the eagle vision kits that I probably will never use if you want to give that a shot
Upvote 0