I have an Umarex that I really like but I'm only seeing the CO2 bulb seal for sale overseas like in the UK I called them and they told me they don't stock them obviously they just want you to buy a new gun. I'm looking at some of the daisies like the 408 so what I'm asking is what co2 pistol could I buy knowing that I can rebuild it if it starts to leak? I'm assuming it would be a Crosman or a daisy but to be honest I'm not having a lot of luck finding those seals either. Let me know what would be a good pistol to purchase that I could rebuild it doesn't matter if it's pellet or BB. Thanks in advance
What CO2 pistols could you actually rebuild?
- Thread starter O2shooter
- Start date
Hello look at a used Crosman Mark1 that gun is still being supported by Mac1 airguns hope this helps Eric
Upvote 0
O-rings are fairly easy to get hold of from multiple vendors here and there including eBay. Here is one vendor;
https://www.oringsandmore.com
O-rings are all most guns need. If they need more it's best if they are Crosman as several people have parts for many of the older guns including;
Precision Pellet in Pa;
http://www.airgunshop.net/index.html
[email protected]
Mac1 in CA;
https://www.mac1airgunshop.com/
SW airgun repair and has a limited supply of some parts.
email or call for info;
[email protected]
Grips for airguns;
Steve Corcoran
https://www.scstocksandgrips.com/
22xx stocks;
Tom West
https://urgthrash.wixsite.com/squirrelmaster
Vernon Austin;
[email protected]
The list for aftermarket Crosman parts is extensive;
https://www.airgunnation.com/topic/any-2240-hpa-conversions-out-there/#post-1197392
https://www.oringsandmore.com
O-rings are all most guns need. If they need more it's best if they are Crosman as several people have parts for many of the older guns including;
Precision Pellet in Pa;
http://www.airgunshop.net/index.html
[email protected]
Mac1 in CA;
https://www.mac1airgunshop.com/
SW airgun repair and has a limited supply of some parts.
email or call for info;
[email protected]
Grips for airguns;
Steve Corcoran
https://www.scstocksandgrips.com/
22xx stocks;
Tom West
https://urgthrash.wixsite.com/squirrelmaster
Vernon Austin;
[email protected]
The list for aftermarket Crosman parts is extensive;
https://www.airgunnation.com/topic/any-2240-hpa-conversions-out-there/#post-1197392
Upvote 0
+1 on the Crosman 2240. Crosman will sell you any factory parts you need and their are lots of cool after market parts available as well for all kinds of upgrades.
Upvote 0
Yes it does help Thank you Eric. It's the bulb CO2 seal that I was concerned with. I just saw a few YouTube videos where they were talking about making you seals out of silicone mats from Amazon I was thinking maybe something like RTV sealant for a car but I'm going to look into those other guns thank you for the recommendations and the links
Upvote 0
I've redone a lot of the vintage Crosman's get the kits that have the aftermarket poppets included because I can almost guarantee the originals will always be bad.
Upvote 0