Nice!!
Have you tried rubber bark inside a card board box. The duct tape to patch the holes. Pretty quiet. Did about 6 last week for about $20.
Upvote 0
What did you do airgun related today.
- Thread starter Florida_Man
- Start date
Have you tried rubber bark inside a card board box. The duct tape to patch the holes. Pretty quiet. Did about 6 last week for about $20.
I have a box I use that full of old clothes, it has a piece of plywood at the back. Plenty of amazon boxes to refresh it.
I have that electrical box to put out at my pest kill zone so I can always check zero. We get heavy dew every night, so it can stand up to that. I also have a steel spinner, but I only check zero on that during the day. Most of my shooting is into a box like you described.
Upvote 0
Doing final staining and coats on my custom 2240 grip. Used the stump of my olive tree I cut down 14 yrs. ago. Used Winchester cherry red stain.
Upvote 0
That is GREAT work & beautiful wood! Please show pics after you finish & have it on the gun!
Upvote 0
Found out I lost a part for my Notos. A good member of the forum hooked me up with a replacement he wasn't using.
Other than that, a little steel ringing with the P35 25 cal.
Other than that, a little steel ringing with the P35 25 cal.
Upvote 0
I shot 80 rounds with the P35 25 cal on paper. And I found out what I'm doing tomorrow. After filling I developed a leak at the fill port. Probably just a piece of debris. I’ll use the opportunity to replace the Snowpeak factory o ring with a good one I have for it.
Upvote 0
Had some fun with my Notos. Practiced with my bipod standing. Worked better than I expected...Shooting at 40 yards.
Upvote 0
Received a Snowpeak M60B .22 calibre from Wes of Airgunarcheryfun today. Too much snow at the moment, but hopefully I will be able to go out next week to do some testings.
Anyone has this airgun? Any thoughts?
My initial reaction after holding it in my hands for the first time was a pleasant one. It has a good weight to it and it feels great to shoulder.
Of course it has a similar look to my FX Impact MK2. If it shoots well, then this would be a catch of the day.
View attachment IMG_8534.HEIC
Anyone has this airgun? Any thoughts?
My initial reaction after holding it in my hands for the first time was a pleasant one. It has a good weight to it and it feels great to shoulder.
Of course it has a similar look to my FX Impact MK2. If it shoots well, then this would be a catch of the day.
View attachment IMG_8534.HEIC
Upvote 0
Tuning the Rocket 2 for efficiency and power. Unfortunately the gauge blew up when I loosened to degas it. The o-ring rolled into the vent hole and pressurized it causing the bezel to explode. I have fixed it now by adding a bleeder screw on the end cap.
Upvote 0
I opened up the P35 and inspected the O rings and air cylinder. Nice and dry in there. I didn’t have the o ring I needed, but a wipe down and application of good quality silicone grease did the trick. The o rings were still in good shape. Got the work done at 530am. No leaks now.
Upvote 0
Test fitting my stock on this custom build. Still lots of work to do, barrel shroud/ moderator, shorten the barrel 3" and thread for tensioner. Stock needs minor adjustment for gage relief and safety is binding.
Upvote 0
I was taking a walk,
saw a huge discarded box
All i saw was target backing
it's now cut up in the garage
Mike
my airgun Haiku..lol ..not traditional
saw a huge discarded box
All i saw was target backing
it's now cut up in the garage
Mike
my airgun Haiku..lol ..not traditional
Upvote 0
After my wife got home I got a little more time in the yard. After my JRT finished takes a dump behind my target I was able to shoot my old pal, PP700SA with the 177 barrel. The Sumo is overkill, but it hardly makes a sound.
Upvote 0
I did all armchair airgunning today as it was only 18 degrees out but monday is 47 and 50's after that !!
Upvote 0
just building the target area , had to do some shifting of stuff around , two more days of below 20 so got time indoors .
Upvote 0