Made a fixed fill QD on the lathe for the Vulcan 3. Now to make a Delrin cap for it and then do one of each for the Uragan 2.
Upvote 0
What did you do airgun related today.
- Thread starter Florida_Man
- Start date
I took the part 66 out of my PP750 and drilled the port out to 4mm. I cleaned it up with a file.
It’s currently sitting at 2000 psi on the reg. It shoots 10.3gr 670 fps for 10fpe.
It’s currently sitting at 2000 psi on the reg. It shoots 10.3gr 670 fps for 10fpe.
Upvote 0
Upvote 0
I recently bought a cool parts project, an American Air Arms 357 Slayer that needs some TLC and quite a few miscellaneous parts to bring it to actual working condition. So I'm tinkering around with the parts in hand for now, figuring out refinishing, getting screw sizes and a list of needed stuff around to start the project.
Upvote 0
Sun has finally come out this week so went to the farm after feather or fur (armed with the remmi compact and Tikka .243).....
No airgun fodder turned up so just killed some mud and flints out to 60y, but Mr Muntjac did so......
No airgun fodder turned up so just killed some mud and flints out to 60y, but Mr Muntjac did so......
Upvote 0
Made a new Barrel band for the Avenger on the 3D printer, much better than the old one, set better in-fill, 50% and increased PLA temp to 210° c, took 23 hrs, but the results are much better.
Upvote 0
I finally went to the gun range. Despite 35 deg temp and 15 mph wind . The sun was shining and I got a chance to finish all the markings on my field target side wheel.
Then I set up at 55 yards and just shot till I found the proper holdover for 55 yards. Then a little plinking before it was just to cold and windy. I had a great time . Finally knocking down a field target felt great. It’s been a couple years since I got to shoot out past 25 yards.
Then I set up at 55 yards and just shot till I found the proper holdover for 55 yards. Then a little plinking before it was just to cold and windy. I had a great time . Finally knocking down a field target felt great. It’s been a couple years since I got to shoot out past 25 yards.
Upvote 0
Picked up my throne gen 2 barrel after dropping it up from my friends local airgun store on Thursday. He worked on it for me as it had a rifling issue towards the end of the barrel. He removed the rifling 1/4" back from the end of the rifling, and gave it an internal Crown. This should work the same as removing barrel length and recrowning. Had the chopped from the end of the barrel he would've needed to make me a new 1/2x20 threaded end. Hoping to test this tomorrow and find good fortune in this process!
Last edited:
Upvote 0
Thank you! He did say that if it still had the issue that he would remove some more, potentially the whole choke, but if that's the case that I would need to shoot something between .221 and .223, so we'll see!
Upvote 0
Looking/shopping around for another PCP, Possibly in the sweet-n-sour flavor of another .457, BUT......open to others as well. Mind not made up yet...
Upvote 0
I shot 2 15rd mags through my PP750 at a target under my bird feeder. It’s ready for any vermin that show up.
Upvote 0
The most important thing airgun related that I did today was to wake up this morning.. 
Every day includes something airgun related.
Every day includes something airgun related.
Upvote 0