Received the fitting I ordered last night. Re-tap a couple to M10x1.0mm then ass'y. Did leak test, all good, then used my old test mule 2260 crosman for different pressure setting. This gun works best at 1450 psi.
Upvote 0
What did you do airgun related today.
- Thread starter Florida_Man
- Start date
Drove into town and picked up the tin of .20 cal pellets I bought from AOA. Now I can test the Sheridan I picked up yesterday.
Upvote 0
First one of four wind flag is finished. Now to test it Sunday at the N50 match at Open Grove in Oxnard California.
Upvote 0
I shot my PP750 177 with the SST and 8.4gr JSB’s. Not the best barrel, but good enough for 20 yard pest control. It’s shooting about 11 FPE. With the buck rail lower, folder, and bottle conversion it’s a really fun plinker.
Upvote 0
Shooting my Crosman MK1 & 2, and S&W 78 this morning, then I remember I now have on inline variable regulator. So started making some grip cap for this guns as it share same threads. Now I can shot it as original CO2 or teethered HPA reg to 900 psi.
Upvote 0
I think I might have clipped the one on the right, left is DED
My battery was 2% left. It auto shutoff while I was getting in position, I flicked it on once in position and made a quick shot. 2nd battery in now and that one is charging.
My battery was 2% left. It auto shutoff while I was getting in position, I flicked it on once in position and made a quick shot. 2nd battery in now and that one is charging.
Upvote 0
Finished up the padding in the Nanuk 995 rifle case. Worked out rather well and is multi rifle cut out, this one for the Paradigm and Rapid MK2 . I have a few top foams and can switch rifles , double Hw100 , and a CZ457 PB . The case is heavy empty but has rollers which help.
Upvote 0
Built up a 150CC+ plenum with a 700CC bottle for a .25 rifle. Getting all the various joins to seal AND clocked required a lot of work. Couple bonded washers, 1 m18 washer and a special 10mm thick adapter from Trajectron. Been holding air for several hours.
Huben Power non regulated U adapter.
Shan Bao 40CM 3000psi aluminum tube. M28x1.0 at one end and m28-m18 adapter on the other.
Regulator 1/2 of Huben Power Cricket. Leaves the M28x1.0 that screws directly in the 40CM tube.
M18x1.5 extension to get the U past the barrel to screw on. Needed the 10mm as the Cricket bottle end is 32mm and the extension internal is 25mm.
Currently set up for 2500psi.
Seems solid, no flex, and the gun is hitting nuts on.
Need to put it on a Chrony and see what the numbers look like.
Huben Power non regulated U adapter.
Shan Bao 40CM 3000psi aluminum tube. M28x1.0 at one end and m28-m18 adapter on the other.
Regulator 1/2 of Huben Power Cricket. Leaves the M28x1.0 that screws directly in the 40CM tube.
M18x1.5 extension to get the U past the barrel to screw on. Needed the 10mm as the Cricket bottle end is 32mm and the extension internal is 25mm.
Currently set up for 2500psi.
Seems solid, no flex, and the gun is hitting nuts on.
Need to put it on a Chrony and see what the numbers look like.
Upvote 0
Spent the morning deciding what gun I will be taking to Ohio for a 4 day visit with family next month.
I think I have it narrowed down to the NOTOS and the CS3 compressor.
Nice and compact.
I think I have it narrowed down to the NOTOS and the CS3 compressor.
Nice and compact.
Upvote 0
I spent the day at the Indiana Airgun show. Had a fantastic time. Met a bunch of people from the forum. Got a super deal on a big compressor . And I got to display my gun collection. 
Upvote 0
Well. for most probably a little untraditional.
But i put up a WAP at the range today, mind you it did not work all too good, TBH i think a more expensive / powerful one are needed to pull it off.
Probably need to put up another one
But i put up a WAP at the range today, mind you it did not work all too good, TBH i think a more expensive / powerful one are needed to pull it off.
Probably need to put up another one
Upvote 0
Nanuk is Innuit for bear / polar bear, if that case can handle one of those,,,, damn good stuff
Upvote 0
Upvote 0
No shooting today, too windy today. Decided to save the day by finishing my grip for the pp700 I got recently. Sealer and 1st coat applied.
Upvote 0
I was there as well. Navy hat.I spent the day at the Indiana Airgun show. Had a fantastic time. Met a bunch of people from the forum. Got a super deal on a big compressor . And I got to display my gun collection.
Upvote 0
Filling up one of my two new tanks, as well as setting up yardage on the parallax wheel on the usft!
Upvote 0
Have to get back out tomorrow and verify the yardages, but as of right now I have 11-29 yards and the 50 yard mark done. Next time I am out at the range I am going to grab my Paul's targets and do some shooting, as well as the cardboard to check drops across the ranges.
Upvote 0