What did you do airgun related today.
- Thread starter Florida_Man
- Start date
Well the last few days I've been working on my own pistol project. I liked how the poor mans AP16 that I did for my brother that I wanted one for me, only a little shorter. No more than 300 mm OAL. Barrel right now is 230 mm, I'll shorten it a little more. Tank with all the regulator and end cap mods nets 60 cc. This will set to 12 fpe for more shot count.
Upvote 0
today i will drive to Champions Choice (1 hour ) . C.C. is all about top of the line precision shooting look up the catalog , (and wear a bib ) the drool will be excessive .
Stan in KY .
Stan in KY .
Upvote 0
Ordered an o-ring kit for my Avenger Bullpup .22, and finally got around to ordering an electric pump (had been using a 6000 PSI nitrogen bottle for a couple of years until the bottle rental increased more than 100% without warning).
Upvote 0
IF i were to buy a PCP pistol it would be one of Martins , hands down the only one i would be interested in .
Upvote 0
Today i started the process buying the land next door 225 foot lake frontage for a total of 300 YAHOO!!!!
Upvote 0
Working on sharpening the points and hand cutting a beveled border around my stippling work from the other day.
Upvote 0
I fixed a coworkers leaky p-rod, and shot some iguanas with the katran .22 using the AEA 25gr pellets
Upvote 0
Fabricated new end cup for the Notos pistol to gain some volume. Then adjusted reg down to 1750 psi, now leak checking before install.
Upvote 0
On Holiday now for another week. Made a trip back home to the Black Hills, looking for that perfect "retirement" spot and stopped by Utah Airguns yesterday on my return trip to the PNW. Dang they have a whole bunch of goodies in there. Played ball with the dog and need to hit the lottery b4 I return 
Nice to actually see and feel, buying online is convenient but not always what we think it will be...
Nice to actually see and feel, buying online is convenient but not always what we think it will be...Upvote 0
I tested my Cz200 hunter and Concept Lite on the new rubber mulch box I built. The lids on the Husky brand can withstand 30 FPE, 12 FPE just bounces off. I'll be taking a jig saw and cutting out pieces of the lid.
Upvote 0
A 2nd and 3rd round refining the stippling work randomizing the pattern and eliminating flat spots. Followed by lots of hand sanding and surface prep for staining.
Upvote 0