What did you do airgun related today.

[lee9]

these rats are bursting with excitement to meet my 40 grain hollow points from an Extended m4. I have to admit this is superb fun to do but it's productive also as these pests keep going in the walls of our house. so a good night to get rid of a load of them

 

[BABz58]

Does checking my email for shipping updates count?
Have a scope coming tomorrow or Monday.
And a new Break Barrel coming Tuesday. The Break Barrel is so important to me, I took a vacation day for Tuesday

 

[BABz58]

these rats are bursting with excitement to meet my 40 grain hollow points from an Extended m4. I have to admit this is superb fun to do but it's productive also as these pests keep going in the walls of our house. so a good night to get rid of a load of them

lol. One and Done

 

[Peashooter]

Going to push a few patches thru the Two barrel and then charge the digi scope so its RDY for action
Also restock the ammo box, i am down +2 tins after this weekend.

Probably order some more AMMO, i am thinking more of the MRD pellets I realized the Two like, and maybe a few boxes of Zan slugs.

 

[woogie_man]

Finally caught one of the bunnies in my yard, that stupidly stuck around for to long.

Then was able to get in touch with a fellow forum member who is interested in a 30 cal barrel for his 22! So I can finally get my Ghost into a 22 caliber

 

[rc4fun]

I completed my list of RAW 1000x o-rings.

 

[HogKiller]

Got a nice lit magnifier as a Christmas present to me. Took apart the Raptor to find the ^%$# air leak, I think I found it, the 0-ring in the fill check valve had a bad one or a very tiny piece had broken off. Still awaiting my other present from me to me.

https://www.amazon.com/gp/product/B0B8RZWW8X/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&th=1

 

[Bngen3]

A few days ago I got a shouldered bolt to replace a broken one. Got in the lever switch today hoping it would work after soldering the tiny wires to the tiny switch…kapow…shes as good as old

 

[Bngen3]

While I waited on parts I made a 3d print of a single shot tray for the rogue. If any one has a rogue and a 3d printer, here is link
https://www.thingiverse.com/thing:6873753

 

[boresnake]

This is curious.

 

[Dan B]

What did you do today?

Sort pellets?
Mount a scope?
Shoot a rifle you have not had out in awhile?
Checked some seals?
Checked to make sure all screws are tight?
You name it.

I’m trying to stay away from the buy/receive haha
This thread is to promote what you already have.

——-

I took my Pard NV008 off my Notos and put it on my P35 25 cal. I zeroed using my ZB mount to my required distances. I also set up a camera to alert me to the critters I’m after. There are some larger critters that need some lead at night. I also plan on installing the plenum and barrel kit as well as some buck rail stuff on the notos.

This is curious.

I ordered a umarex notos today. Should be here Thursday. Hopefully I Will shoot it Friday

 

[Bedrock Bob]

I shot six beer bottles at 110 yards offhand open sights with a Cometa 400 .22 breakbarrel and Wal Mart CPHP's. It took 10 shots to break them all.

I skinned and gutted them and I'm eating them for dinner as I type.

 

[Loff]

Assessed my pellet trap and it needs some overhaul due to holes in back wall. It was built few years ago before I bought my first PCP. It worked fine with springers that I have. But shooting 13.43gr JSB KO in tight group made holes in the back wall.

Then installed foldable stock to PP700S-A. It was a bit wobbly at the folding hinge when un-folded. Glued shims to take up free space. Credit card thickness was just right. Colored them black with sharpie.

Reorganized gun cabinet and found out that my FX Dreamline's bottle gauge reads "0". It has been sitting in "idle" for several months. Still had pressure in plenum (reg. pressure). Filled bottle to 150bar. Will see tomorrow what it shows.

 

[Bngen3]

Designed a Silhoutte target today, if anyone wants to 3d print them here is link
https://www.thingiverse.com/thing:6878546
in process of making a base but haven't test fit or posted yet. Probably could just use some paper binders and clip to a board on bottom.

 

[Iowa Airgunner]

I got to shoot a full 36 shot card of 12 2 inch targets with my 1701 pistol fitted with a scope and stock. Shooting free hand standing is so much fun. And I can finally just pick up my gun load a target and shoot. It’s only 15 feet but after six years it is great.

 

[Peashooter]

my pellet trap

Visiting my M8 Tuesday to put another roof ( tarp ) on the shot shed, i found a tire thread a truck had thrown off, i picked it up CUZ i think it will be excellent for a pellet trap.

It will be " fun " cutting it into smaller pieces though, CUZ i cant see any other tool we have for doing it other than a angle grinder, and that in thick rubber got to be tricky.

I am a little on the back foot about how to mount it, i think if you just use it as a backing on a sloped angle like your trap, well as it is rubber it might just be kicked strait back out of the trap rather than getting deflected down.
So i have contemplated smaller strips of it that can flex a little when hit and then just " drop " the pellet strait down

It will of course necessitate a trap that is somewhat oversized to make things fit, but i am OK with that as it will not be moveable, or at least not without a ATV

 

[Bngen3]

Visiting my M8 Tuesday to put another roof ( tarp ) on the shot shed, i found a tire thread a truck had thrown off, i picked it up CUZ i think it will be excellent for a pellet trap.

It will be " fun " cutting it into smaller pieces though, CUZ i cant see any other tool we have for doing it other than a angle grinder, and that in thick rubber got to be tricky.

I am a little on the back foot about how to mount it, i think if you just use it as a backing on a sloped angle like your trap, well as it is rubber it might just be kicked strait back out of the trap rather than getting deflected down.
So i have contemplated smaller strips of it that can flex a little when hit and then just " drop " the pellet strait down

It will of course necessitate a trap that is somewhat oversized to make things fit, but i am OK with that as it will not be moveable, or at least not without a ATV

Sawzall works like butter, just cut out the steel belt. I cut up old Atv tires in small squares to use as a door sweep on shed doors

 

[jps2486]

Not much!

 

[Dan B]

My new notos arrived yesterday a day early. Getting ready to shoot it.

 

[Florida_Man]

My family and home have been getting all my attention the last few months. I had a major repair to my roof. My kid has had a stomach virus, flu a, and now pneumonia. He's back to getting well. I had the flu and it kicked my butt.

Today I put the AA magazine system on my S200. The S200 and Huntsman both got mounted with Discovery 6x compact scopes. Invasive lizards have a lot of lead heading their way!