saw maybe 5 of this gun @ Central PA air gun show ! and a Hi-score very short barrel , looks like this picture but the barrel ended where this one folds ? this EDIT additional picture is the one short i saw .
Last edited:
Upvote 0
What pistol did you shoot today
- Thread starter Septicdeath
- Start date
.25 Gk1 with the power dialed down for the sake of my neighbors. I have been shooting the 25.4 gr fx pellets but only had 34 gr around for this string (which I recorded just for the sake of adjusting power to something suitable for these pellets). Pretty nice shot string however! Around 330 bar down to around 270. The shots are listed in reverse order but it's such a flat shot string it looks the same either way 
. Regulator schmegulator!
. Regulator schmegulator!Upvote 0
Just finished rebuilding my Hy-Score target model. Shot a few round, still a little dieseling. Will chrony tomorrow. Oh thanks to Septicdeath for giving me idea on the rear sight. It's a winchester 94 pre 64 that works perfectly. Now to find grip for this, has little crack on it.
Upvote 0
adjusted 1/2 turn ccw on the power adjuster from yesterday. Added about 16 fpe. Still shocked by these strings.
Upvote 0
It's original, that's why I want same original grips. I epoxy it on the back and is holding up, but the hair line is bugging me, lol.
Upvote 0
For a physical repair only put epoxy on the back and run a vacuum in the front side, momentarily. It pulls the epoxy to the front side of the grip. You may have to do a second and final application in the backside. It is even more effective to spread the epoxy into wood. Be Well My Pistoleros, 'dito.
Upvote 0
shot the china special .177 . interesting shooter , break barrel cocks harder than any rifle i have but has an est. 3 FPE which is less than the Diana23 i just bought .
Upvote 0
22 Bandit
Shot this target @ 30 yards and set POA/POI to the top orange dot.
Then fired 35 rounds on a 2,900 PSI fill. One shot at each dot. Shot 29 was right on then POI started to drop significantly. FYI I didn’t shoot through the chronograph as I was looking for empirical data.
Wind, trigger pull and me shooting the wrong dot (2X scope isn’t very forgiving at that range) got a few shots but overall I’m happy with the results.
Then fired 35 rounds on a 2,900 PSI fill. One shot at each dot. Shot 29 was right on then POI started to drop significantly. FYI I didn’t shoot through the chronograph as I was looking for empirical data.
Wind, trigger pull and me shooting the wrong dot (2X scope isn’t very forgiving at that range) got a few shots but overall I’m happy with the results.
Upvote 0
Shot my custom Prod after cutting barrel from 14.5 to 12 inch and installing one of my Notos tank and reg. Still getting 782 f/sec with JSB. Then shot my newly made Notos pistol, I really need to scope this as the red dot is not doing justice with my bad eyes.
Upvote 0
Thanks! I have my Huben GK1 .25 set to shoot the 25.39 gr JSB's at 800-820 and I then turn the power 1/2 turn and get the 33.95 grain JSB at the same FPS.
Upvote 0
Decided to give my HW77 a break and take out the P-Rod. Squirrels better watch out if they get within 30m!
This thing is so small and handy. Honestly, too light for my liking. I’ve been looking into adding weight somehow. Maybe a longer barrel, shroud, and reservoir. Maybe a reg? Definitely planning to try my Decimeater on here one day.
Forgive me if this doesn’t belong in the pistol thread.
This thing is so small and handy. Honestly, too light for my liking. I’ve been looking into adding weight somehow. Maybe a longer barrel, shroud, and reservoir. Maybe a reg? Definitely planning to try my Decimeater on here one day.
Forgive me if this doesn’t belong in the pistol thread.
Upvote 0
Here is my nasty 1911 (Artemis LP400) that I got in a part exchange deal. Five shots off-hand at 10m.
It was not brilliant out of the box, 288fps and darned ugly.
After a few tweaks, it is now running around 350fps, but as a friend pointed out, you can put glitter on a turd, but it is still a turd...
It was not brilliant out of the box, 288fps and darned ugly.
After a few tweaks, it is now running around 350fps, but as a friend pointed out, you can put glitter on a turd, but it is still a turd...
Upvote 0
Shot this guy some more today. Was looking for a Diana model 6 but found this Winchester 363 ( mfg in June 1970) on eBay that was “untested” or code for it don’t work. Was in excellent cosmetic condition but sure enough the front seal was toast. Rear dummy seal was super brittle and cracked apart when I removed it. I had ordered both along with a new breech seal for good measure. Saw 2 videos that if nothing else showed me how not to refresh it so away I went. I think I did ok. I’m seeing 440 fps with RWS Basics and same with the R10 pistol. Got it done last weekend but today was first chance I had to really enjoy it and enjoy I did 
. Shoots as smoothly as a CO2 or SSP and I can’t wait to get some more trigger time with it !
. Shoots as smoothly as a CO2 or SSP and I can’t wait to get some more trigger time with it !Upvote 0