What Ring Height, Medium or Large, would I need for a 44mm Objective lens mounted on the AGT Vixen. Scopes: Bushnell Engage x44 or Vector Veyron x44
Tuning What Ring Height, Medium or Large, would I need for a 44mm Objective lens mounted on the AGT Vixen. Scopes: Bushnell Engage x44 or Vector Veyron x44
- Thread starter GaryD13
- Start date
Gary,
I use the low-profile cantilever (picatinny) 30mm WestHunter rings for the Vector Veyrons on my Uragans. The ultra subcompact VV scope makes eye relief tricky since the space for ring placement is limited, this system solves that. WM
I use the low-profile cantilever (picatinny) 30mm WestHunter rings for the Vector Veyrons on my Uragans. The ultra subcompact VV scope makes eye relief tricky since the space for ring placement is limited, this system solves that. WM
Upvote 0
Medium rings should be fine since you don't have a magazine sticking up like some other setups.
Upvote 0
You're most welcome, Sir, have exact same set-up (Vector Veyron 6-24x44 FFP Non-IR) on U1, U2 and V3. Don't know Vixen but suspect similar scope mounting program. Think you'd like it. WM
Upvote 0
Help & suggestions needed - I know there is about $100 pricing disparity between the Bushnell Engage and the Vector Veyron scope lines. I can justify the costs if I'm truly getting a better-quality scope all around. I'm tossed between 4 scopes: Bushnell Engage 2.5-10x44 & 4-16x44 and the Vector Veyron 3-12x44 & 4-16x44 (w/o illumination)
Upvote 0