I have a Kral Puncher Breaker and my O ring for the main valve closed to the stem is damage and there is air leaking out after I take a shot please help me what size of the o ring and how can i get it, I appreciate your help!
Puthea
what size is the o ring for main valve stem
- Thread starter puthea
- Start date
I have a Kral Puncher Breaker and my O ring for the main valve closed to the stem is damage and there is air leaking out after I take a shot please help me what size of the o ring and how can i get it, I appreciate your help!
Puthea
I think your valve may be broken,.Troy Hammer at annihilator airguns and has a video on YouTube on how to take apart your gun and replace the valve. The valve is about 7 bucks from pyramyd air. Sorry to see it happen to you.
https://youtu.be/5s-0c50sn5E
https://www.pyramydair.com/s/a/Kral_Arms_Firing_Valve_Part_AT_28/8270
https://youtu.be/5s-0c50sn5E
https://www.pyramydair.com/s/a/Kral_Arms_Firing_Valve_Part_AT_28/8270
Upvote 0
when you fire a shot do you hear just a normal bam or do you hear a continuous pfff for bout a second or so?
(its hard translating the sounds lol)
if its the continuous pfff then your valve stem is broken and needs replacing
(its hard translating the sounds lol)
if its the continuous pfff then your valve stem is broken and needs replacing
Upvote 0
Judging by the mushroomed tip of your valve stem, you might have some other issues. Either poor quality metal used in that gun or you have your hammer spring cranked in the quest for power. It would explain the failure.
Upvote 0