What’s the best mounting solution

[Brian10956]

I have a FX Impact m4 sniper the pic rail has a 20moa built into it. The scope I’m putting on it is a GPOTAC 6X 4.5-27 x50i PLRi it has a 34mm barrel the rings I have on hand are FX adjustable , Eagle Vision adjustable , Warne cantilever type w qr, Warne cantilever with 20moa and qr and probably a half dozen Amazon cheap mounts that collected over the years. I like the idea of the Warne cantilever ones I have as they have quick release levers which Make taking them off for servicing the rifle convenient with less headache of zeroing it in.
If I use the standard rings I do like the Eagle vision and if I go the cantilever route I’m not sure if I need the ones with the 20 MOA or the standard.
I wondered what other think my best choice is.
Most of my shooting is on a range with a 200 yard max but I do have a spot under the power lines with almost unlimited distance to shoot once I get used to the m4 I’ll see what it can do under the power lines but that won’t happen until I get decent with it at 200.

 

[Dairyboy]

Will you be shooting anything close? Like 50yds and in? If not and plan on only shooting long range I'd go with the 20moa rail. Will help alot if shooting out to 200yds+

 

[thane]

With my impact I strive to reduce the number of mechanical connections between scope and barrel, so one piece non adjustable mounts. I also resist mounting and unmounting, keeping it as settled as possible. Remounting, zeroing and then a thermal cycle will usually result in a POI shift.

 

[Coinwa]

Good rings that tighten with a 1/2” nut are far more repeatable when removing and remounting than any of the cantilever type QR rings.

if you want a fixed ring, with added inclination, the Burris Signature rings with inserts are a great way to get another 20moa without the added Murphy attractant of “adjustable” rings.