After disasembling i noticed i lost the transfer port. For 22 taipan vet. Can somebody suggest where i can get new one? or maybe someone has one spare tp?
Taipan where can i buy transfer port for vet?
- Thread starter tsakula
- Start date
Contact the vendor where purchased and hopefully they will be able to help locate what you need. If not reach out to Taipan directly and check with them. Just a thought.
Upvote 0
Send the company an email. They claim to respond to inquiries within one hour during business hours. As I remember that part, I think it would be very tricky to fabricate.
Upvote 0
Years ago guys were screwing up their transfer ports because they were watching videos of how to modify them. They were looking for a source to get new ones. I don’t know if they had any luck. At that time, I think getting any response from the company was difficult.
Upvote 0
I would just find someone with a Lathe, Make port a floating design with a radial groove on O.D. having 4 or more small ports drilled around the grooves circumference. It will flow plenty of air and work just fine.
Where as the factory port is "Clocked" for transfer alignment, a floating design as stated above has no rotation/clocked position.
Where as the factory port is "Clocked" for transfer alignment, a floating design as stated above has no rotation/clocked position.
Upvote 0
Darned good idea...See post above .. not that difficult changing design slightly
I made several at one time for 177 and 20 conversions and machining that round with a bump part on manual machines was pretty time consuming...
Bob
Upvote 0