N/A Where can I find a W.A.R Flex regulator?

[Cgregg90]

Hey guys. I am looking for a regulator for my Wicked Air Rifles Flex. I know with WAR not currently in business it might be tough. Was thinking someone might know the type of regulator they take or one that would work? Any help will be much appreciated! Thanks in advance!

 

[Airgunmann]

Thought they made them in house not exactly sure may have better luck rebuilding it

 

[Cgregg90]

If anyone has one they would like to sell let me know.

 

[Cgregg90]

Thought they made them in house not exactly sure may have better luck rebuilding it

My rifle doesn’t currently have one. It’s unregulated. I’m wanting to regulate it.

 

[Motorhead]

My rifle doesn’t currently have one. It’s unregulated. I’m wanting to regulate it.

Easiest .. just use a NINJA adjustable on the bottle. Or a fixed output and play with pressure for your application.

 

[Cgregg90]

Easiest .. just use a NINJA adjustable on the bottle. Or a fixed output and play with pressure for your application.

View attachment 428650

Thanks. I’ll look into that.

 

[Cgregg90]

Easiest .. just use a NINJA adjustable on the bottle. Or a fixed output and play with pressure for your application.

View attachment 428650

Would you know what output psi I should have my .30 cal flex regulated to?

 

[Motorhead]

Would you know what output psi I should have my .30 cal flex regulated to?

As I recall, with the factory 17" TJ .... @ 2200 using the oem war valve.
Fitted with a Balanced valve and same barrel, Lighter hammer with less stroke at @ 1800
Balanced valve as above and the 700mm FX barrel I'm down @ 1600 for the @ same 80 fpe output with 44.75's

* If you search my Name and WAR / Balanced valves on the GTA forum there is Tons of data there

Best of luck !

 

[Privateer]

I can tell you with no doubts in my mind! If Motorhead says something? You are well advised to listen to him!

 

[Cgregg90]

As I recall, with the factory 17" TJ .... @ 2200 using the oem war valve.
Fitted with a Balanced valve and same barrel, Lighter hammer with less stroke at @ 1800
Balanced valve as above and the 700mm FX barrel I'm down @ 1600 for the @ same 80 fpe output with 44.75's

* If you search my Name and WAR / Balanced valves on the GTA forum there is Tons of data there

Best of luck !

Thanks a bunch!!!

 

[Cgregg90]

I can tell you with no doubts in my mind! If Motorhead says something? You are well advised to listen to him!

I agree to that! I have seen a lot of his stuff on here an he knows what he’s doing. Especially with the WAR Flex.

 

[Larryp]

Motorhead,
Do you perhaps know which threads are in the air tube and in the regulator of the W.A.R
Thank you

 

[Larryp]

Or someone else, we cannot measure the correct thread sizes of the air tube and regulator. Diameter and pitch do not match.?????

 

[Motorhead]

Tube is 1 1/8-20 Same as M-rods.
Regulator thread ( FM ) is always said as differing spec with differing names, I would research that "as Paintball regulator ASA Thread size"

 

[Larryp]

Thank you very much. I want to exchange the WAR regulator for a Huma regulator, but these are M18 x 1.5, so I have to work with reducers