Where can i purchase heavier Hammer springs for my A.G.T Rifles?

[Pleete]

Hi, I am trying to find any business that specializes or stocks slightly heavier hammer sprigs for the A.G.T. lineup. I already have heavier springs for my AGT Vulcan 3 700mm .30cal. Thanks to Jeremy King at African Air Ordinance.com. I'm looking for my original AGT Uragan King in .30 and my Vixen long .22cal. If anyone could point me in some direction, I am open and happy to receive any feedback. Thank you very much!!!!

 

[SkeeterHawk]

I've gotten a whole bunch of springs from CompressionSpring.com. They just stock springs, but if you know what you want, you should be able to find it there.

I hope that this helps!

Jonathan

 

[Pleete]

I've gotten a whole bunch of springs from CompressionSpring.com. They just stock springs, but if you know what you want, you should be able to find it there.

I hope that this helps!

Jonathan

Thank you Johnathan, I have the dimensions, what I'm unsure of when it comes to ordering is how much to increase the coil size by. Do u happen to know. I'd like to order a heavier Hammer spring to my original AGT Uragan King and my AGT Vixen Long .22cal. Any thoughts?

 

[SkeeterHawk]

Hey @Pleete ,

Yes, I certainly have some thoughts on this. The first is to not be afraid to experiment and order some extra. The type of wire makes a BIG difference in the total compression you get, more so than just the wire diameter. The Rate value in their charts gives you an idea, but I ended up making a fixture that would allow me to pull the springs with a fish scale so I could compare the compression that they ACTUALLY gave and it was enlightening. Also remember that you can order a spring too long on purpose, and cut off a ring at a time with a Dremel tool to "tune" the spring in to the compression you want.

My $0.02. Hope this helps!