Where i get the these

[Keyman62421]

Originals are orange. This my attempt to cobble something to work.
I assume these are a 90 hardness. 70's don't hold. Any one have the size spec and/ or suggestions where to get aftermarket or which dealer might have them at less than $5 each! I forgot the picture.

 

[IMADMAN]

If you’re talking Orings try Grainger

 

[nervoustrig]

This my attempt to cobble something to work.

 

[scottg0814]

Could it be a #10 ? UPDATED... It is NOT a #10

About this item​

• Size -010
• 90A Durometer Polyurethane
• 1/4" Inside Diameter
• 3/8" Outside Diameter
• 1/16" Cross Section

Amazon.com

 

[nervoustrig]

Ah okay, there's the picture. Should be straightforward to find a replacement if you can get the measurements. Do you have calipers? Measure its OD and thickness. It appears to be distorted from compression set so also measure the groove it fits into (its diameter and width).

 

[Bam86]

There is a place in Terre Haute called Coldwell & Co. John at the parts desk is an air gunner too. He usually helped me with O-rings. Some of the exotic ones they may need to order.

 

[Gerry52]

Keyman, I have a sh*tload I ordered from Mcmaster-Carr. They're black, not orange but are the right durometer. I'll be happy to mail you a bunch.
Gerry

 

[Keyman62421]

Keyman, I have a sh*tload I ordered from Mcmaster-Carr. They're black, not orange but are the right durometer. I'll be happy to mail you a bunch.
Gerry

Cool, 10 or so.
Tell me what I owe. Always use these

 

[scottg0814]

Keyman, I have a sh*tload I ordered from Mcmaster-Carr. They're black, not orange but are the right durometer. I'll be happy to mail you a bunch.
Gerry

What size o-ring do you have? I've been struggling to find the right one myself? I'd have to check the shop to see exactly which sizes I've tried but I'm pretty sure none have been a 90 so nothing has worked. The one I mentioned in my previous post might be the right one but not sure.

 

[Gerry52]

I'll post the size later. Almost positive they came from Mcmaster-Carr. About 2 or 3 cents apiece & I got 100.

 

[beerthief]

Do you have a place that services Pneumatics , like makes new hose and fittings , that's where i find just about anything fitting wise .

 

[Keyman62421]

Gerry52 I can't find PM button!

 

[Revoman]

Click on Gerry's avatar and look for "Start Conversation", that's the 'new' PM name.

 

[Keyman62421]

Thanks all!

 

[Gerry52]

What size o-ring do you have? I've been struggling to find the right one myself? I'd have to check the shop to see exactly which sizes I've tried but I'm pretty sure none have been a 90 so nothing has worked. The one I mentioned in my previous post might be the right one but not sure.

2.0mm (cross section) x 7.2mm (I.D.)

 

[scottg0814]

2.0mm (cross section) x 7.2mm (I.D.)

Thanks for posting!!

 

[Gerry52]

Thanks for posting!!

Mcmaster-Carr & Oringsandmore both have great prices & any Metric sizes I've ever needed. Just a heads up.

 

[scottg0814]

Mcmaster-Carr & Oringsandmore both have great prices & any Metric sizes I've ever needed. Just a heads up.

I thought these would be a 108 o-ring. Just got an order of these in 90 duro but still leaks. My Stikman from Airtanksplus works just fine and I noticed that their o-ring appears to be beveled.

Would like to get this other fill whip working again so I have a backup.

 

[Keyman62421]

I had 3 whips leak within 10 days.o rings would hold. Stickman is perfect but I never use it. It's my go bag whip.Gerry 52 has mailed me some. Anxious to see.bought a kit # HF. Trying them and holding for a day now. Whooo knows

 

[Gerry52]

Some fill adapters originally come with a hard, beveled white nylon/delrin seal but the ones I've replaced them with are regular o-rings & I've had no problems. A light coat of silicone works well. Keep me posted Glen if those work out. Sometimes it's a fine line between over tightening & not tightening enough.