I thought all FWB300 had a long barrel sleeve? This gun is so front heavy with long barrel/sleeve, it's almost better this way! 
FWB Where is my sleeve?
- Thread starter specie
- Start date
The sleeve was actually an upgrade extra in the European market, but Beeman made them a "mandatory option" on most of the ones he imported! You are right, it makes a HUGE difference in balance and handling; for most of us they are more pleasant shooters sans sleeve.
Upvote 0
There was a surprising amount of variation in those sleeves over the years. Among the guns I have:
+ 300S Junior: barrel 320mm long, with no sleeve ("naked" barrel is 15mm in diameter on all these guns).
+ 300 Match: barrel 445mm long, with a constant-diameter sleeve of 20mm diameter. Mine is unusual in that the sleeve is not epoxied on, I can enjoy shooting it with or without the extra weight.
+ Early 300S Match: barrel 395mm long. Rear part of the sleeve 18mm diameter, and the fatter front part is 22mm.
+ Later 300S Universal: barrel 395mm long. Rear part of sleeve 18mm diameter, front part is shorter but fatter at 23.5mm.
Upvote 0
Are they usually epoxied on? Can you remove with moderate heat? Anyone know?
I have a mint 300 and would love to get the sleeve off, if possible, without messing up the gun. They really weigh a ton with the sleeve on and are so front heavy, especially without that 445mm long barrel!
I have a mint 300 and would love to get the sleeve off, if possible, without messing up the gun. They really weigh a ton with the sleeve on and are so front heavy, especially without that 445mm long barrel!
Upvote 0
what is the barrel OD, it might be interesting to put on a Carbon Fiber sheeve on one
i do see that Waffencenter list them but out of stock and they would cost to get one
i do see that Waffencenter list them but out of stock and they would cost to get one
Upvote 0
The barrel is 15mm OD on all four of my FWB's. I have heard of people removing the sleeves, but I am WAY too much of a klutz and a coward to ever point a torch at an FWB, lol. 
My 300 is unusual in having a beech stock, in addition to the un-glued sleeve. I've only seen one other beech one, the owner told me it had military training markings on it.
My 300 is unusual in having a beech stock, in addition to the un-glued sleeve. I've only seen one other beech one, the owner told me it had military training markings on it.
Upvote 0
The carbon sleeves look decent in the raw. Not sure what the clear coated one looks like, might have to get some.
Upvote 0