Where to buy a cocking lever replacement?

[Max115]

I am looking for a cocking lever replacement for the Snowpeak M60B. The stock version is way too long and the FX Impact lever is not the same thickness.

Appreciate if anyone has a suggestion, thank you.

 

[Motorhead]

Likely a FABRICATION job for someone capable.

 

[Max115]

@Motorhead. Yes, I agree.

 

[Gerry52]

Chan (cfs916 on forum) has fabricated some beautiful knurled brass, aluminum, steel handles for me & others here. Contact him to see what he can do for you. Drawings, dimensions & design would help but first see if he's still at it. His pricing was GREAT.

 

[Max115]

Thank you Gerry.

 

[Privateer]

A metal Chop saw would shorten that handle.

 

[Max115]

@Privateer. Yes, I thought about that. But they would need to weld it back after cutting it. Not sure that would be strong enough for the constant cocking motion.

I am actually referring to the whole cocking lever being too long as compare to the FX one. I would like to find one that is short like the FX for my M60B.

 

[WorriedMan]

@Privateer. Yes, I thought about that. But they would need to weld it back after cutting it. Not sure that would be strong enough for the constant cocking motion.

I am actually referring to the whole cocking lever being too long as compare to the FX one. I would like to find one that is short like the FX for my M60B.

What's downside of longer lever? Sticks out too far when open? Too exaggerated a motion to operate? Never came across this concern before, curious since M60B is on list of future possibles. Thanks, WM

 

[WIndOnYerGrape]

@Firewalker ..?

 

[Firewalker]

@Firewalker ..?

Already on it!

FX Maverick, will need to open the pin holes but it will be a very close fit.

 

[Firewalker]

A metal Chop saw would shorten that handle.

Actually.... you can't.

The end of the lever protrudes to allow finger access.

 

[Max115]

Already on it!

FX Maverick, will need to open the pin holes but it will be a very close fit.

View attachment 435986

The lever of the M60B is thinner than the FX‘S by 1mm. Would need to sand off a bit at the connection.

 

[Max115]

Any vendor sells the FX lever?

 

[Firewalker]

Any vendor sells the FX lever?

Utah Air

 

[Gerry52]

Thank you Gerry.

Sorry MAX, you said LEVER but my brain saw lever HANDLE! Hope you find what you're looking for. Maybe Chan can still help.

 

[jeffman]

these may fit https://spares.bagnallandkirkwood.co.uk/product/snowpeak-p35-oversized-custom-cocking-lever-handle/

 

[Max115]

Sorry MAX, you said LEVER but my brain saw lever HANDLE! Hope you find what you're looking for. Maybe Chan can still help.

I apologize for using the wrong word in my request, but thank you.

 

[Max115]

these may fit https://spares.bagnallandkirkwood.co.uk/product/snowpeak-p35-oversized-custom-cocking-lever-handle/

Possibly, but the website doesn't list out the dimensions of that lever. My guess it would be the same length as the M60B. Thank you for your input.

 

[Max115]

Utah Air

Thank you. I found it, but quite expensive!

Bagnall& Kirkwood SPARE PARTS carries the lever but expensive as well.

I guess I am stuck with the stock lever for now. lol.

 

[Firewalker]

Thank you. I found it, but quite expensive!

Bagnall& Kirkwood SPARE PARTS carries the lever but expensive as well.

I guess I am stuck with the stock lever for now. lol.

Yes, VERY pricey!