Compressors for big carbon fiber tank and compressors for small tank, which one is better?
Which compressor do you like best?
- Thread starter Acecaretech
- Start date
Big, always go big. You can charge tanks and guns with a high capacity compressor.
Mine is your competitors.
Upvote 0
So i use the YongHeng since years, for larger bottles and paintballgun-size tanks.
For smaller bottles i would buy the black shoebox with the 12v cables on the side.
(i don't have one by myself, for this case i use a tuxing which is very similar to the first orange shoebox).
For smaller bottles i would buy the black shoebox with the 12v cables on the side.
(i don't have one by myself, for this case i use a tuxing which is very similar to the first orange shoebox).
Upvote 0
I have both. Recently I had an issue with my large compressor probably due to in part to not using it often enough. It was still under warranty and now since it’s return I now run it once a week ( word to the wise ).Also there are two large scuba tanks with nice guages. While it was down I purchased the GX4I and if was doing it all over again knowing what I know now I would have went with the GX and possibly one with the battery pack for travel. The two large tanks cost about what the GX costs not to mention the footprint the compressor and tanks take up in my garage and the aggravation whenever something goes wrong. So hindsight being 2020 I would probably have went with the little red box setting on my bench.
Upvote 0
I do most of my shooting at home and fill guns directly. When topping off I use the GX CS3 and when filling larger capacity and high max pressure guns after service and or repair I use the Yong Heng.
Upvote 0
Yong Heng for me. I'm obsessive (anal) about caring for my tools & equipment & following the great tips & advice I've learned on AGN about excessive heat, the right oil, maintenance, etc on my "cheapo" compressors I've gotten better service & longer life from YH than I could have hoped for. One has to be sure it's AUTHENTIC Yong Heng.
Last edited:
Upvote 0
Budget, budget, budget...after years of using budget priced compressors I decided "I was worth it" and bought a Coltri MCH6 ICON. Very happy with it! BUT - the GX CS-4 or GX CS-4i are both the best in class for smaller, portable and lower cost compressors. Check them out - you won't regret it!
Upvote 0
If you are willing to try the Acecare brand, it won't disappoint you either, the quality is the same as yongheng
Upvote 0
So how is the support on these acecare products? If there is a problem where do we send it for repair? Where do we order parts like piston seals and pistons ?
Upvote 0
You could find us from the whatsapp and email or the website, friend, about the order of the compressor parts. What's your guarantee elsewhere? Could you tell me? Let me check.
Upvote 0
Parts are also available from Acecare and many compressors are stocked in the US warehouse too.
Upvote 0
