Whiscombe honey vs pledge vs slick50 vs krytech?

[Gaberossi]

Next time I wash some pellets I'll chime in and show how many flakes of lead come off and how dirty the cleaning agent gets. I wash about 6 tins of 300 JSB .25 pellets at once and the amount of stuff that comes off is crazy. 

 

[Kinetic45]

I have been trying Rooster Jacket Lube diluted 50/50 with water on the latest batch of cleaned and sorted .25 JSB 33's and it drys to a non-tacky wax coating and one of my Mrods and my WARP like it better than plain pellets. It also shoots well in my 45 Texan. A bottle is going to go a loooooong way, a little dip and drain off or use a little in a baggie { then remove from dip and gently tumble around a bit to get the excess out of the skirts} then let dry on a screen or wax paper. The excess mixed solution stores in a sealed container till next use. Works as well on air rifle pellets as on PB pistol and rifle cast bullets. Does not soak up atmospheric moisture once dried and stays a wax.

This was a lube I used with great success back before I gave up powder rifles for the challenge of pneumatic (specifically shooting a 458 WinMag using paper patched no groove cast 443gr for long range Quigly type 1000 yd shooting) so I got some fresh to test (the old unused bottle had dried up during the last 10 years, haha) and it still does a good job.

https://www.buffaloarms.com/rooster-jacket-waterproof-bullet-film-lube-16oz-bottle-rlrj

or here (has reviews too)

https://www.midwayusa.com/product/1010286646/rooster-jacket-waterproof-bullet-film-lube-and-paper-patch-lube-16-oz