Who fixes Huben leaks?

[Scotay42]

I bought the leaky Huben and do not have any of the special tools. It is leaking from the barrel. I would like to get the tools or send it to someone that can fix it.

 

[Pale_Rider]

Before you send it to someone try resetting the striker. Could be the striker is not holding the opening valve shut.

If that doesn’t work reach out to Krazcool Airguns or New England Airguns for repair.

 

[Scotay42]

Before you send it to someone try resetting the striker. Could be the striker is not holding the opening valve shut.

If that doesn’t work reach out to Krazcool Airguns or New England Airguns for repair.

No response from Krazcool, I will give NewEngland a shout. I will try that trick though.

 

[Scotay42]

The Huben is making the journey to Kelly at Kraz Cool AG LLC.

 

[CfiDave]

Good choice.

 

[Newton]

The Huben is making the journey to Kelly at Kraz Cool AG LLC.

Fixed now? What turned out to be the leak source?

 

[Scotay42]

The opening valve was sticking, leaking through the barrel. Traded it to a friend and it is no longer leaking after an over-lubing and alot dry/wet firing. So, more than likely just sat too long and dried out the opening valve seal. It is now operating beautifully.