When I cock the wildcat, the magazine doesn’t quite turn all the way to index the next pellet. Is something loose that could be tightened or is it a mag problem. All three mags do the same thing.
Tuning Wildcat mk1 mag indexing problem
- Thread starter lancehenley1
- Start date
After replacing the regulator last spring on my .25 Wildcat Mk I, I had this problem on my Prairie Dog hunt. I was told to make sure the two blocks that clamp on the air tube was far enough back to allow the cocking rod to go back far enough. I just put a Power Plenum in and move the clamps back till they were against the check rest and it works perfect now.
Mark
Mark
Upvote 0