Trying to get an ldc for my Xisico Sentry. I just need to know if I have the barrel threaded if an ldc will have enough room to clear air tube. Distance is around a half inch?
Thoughts ??
Thoughts ??
Will an LDC work ?!
- Thread starter Point1Seven
- Start date
Looks like a DonnyFL Koi or Tanto would fit... The larger diameter ones I’d say not.
https://donnyfl.com/products/1-22-x-7-inches-koi
https://donnyfl.com/products/1-22-x-5-inches-tanto
Look at these adaptors if your barrel is one of these diameters.
https://donnyfl.com/collections/adapters/products/11mm-12mm-15mm-and-16mm-slide-on-adapter-with-1-2-x-20-unf
Mike
https://donnyfl.com/products/1-22-x-7-inches-koi
https://donnyfl.com/products/1-22-x-5-inches-tanto
Look at these adaptors if your barrel is one of these diameters.
https://donnyfl.com/collections/adapters/products/11mm-12mm-15mm-and-16mm-slide-on-adapter-with-1-2-x-20-unf
Mike
Upvote 0
Or get one of the guys with a 3d printer to make you a custom press-on LDC. The 3d printed LDC on my Bulldog has surprised me on how well it work.
Upvote 0
Never seen a picture of one with shroud removed. Already has the rear shroud mount, what part #2 look loie? Room for improvement there? Or just get a section of round CF tubing use a cut up section of part #2 as a barrel locator up front then an end cap. A nice $40ish DIY prroject.
I'm sure TKO has something or can whip one out if looking for an slide on.
What is you o.d.? Tons of options these days. I personally like shrouds.
John
I'm sure TKO has something or can whip one out if looking for an slide on.
What is you o.d.? Tons of options these days. I personally like shrouds.
John
Upvote 0
I love the shroud but the .177 in this rifle is loud and I mean loud!! It’s a one size fits all shroud and it just doesn’t help any but lol. But okay I am going to send it to get threaded then and then maybe pop a TKO or a Donny On it.
Upvote 0
A TKO is a waste of time if you're looking for quiet. The DonnyFL suppressors are what you want. The KOI is 1.2" diameter and 7" long.....it will do the best and shouldn't be a fit problem.
I use it on my Wildcat 25. Here's a pic.
I use it on my Wildcat 25. Here's a pic.
Upvote 0
If you want to try the TKO 22 caliber model, PM me your address and I'll put it in the mail for you (US only).
But it wont make it quiet.
But it wont make it quiet.
Upvote 0
Hey Bob,
Thanks but I am thinking I don’t have enough space for any moderator. I haven’t measured with a caliper yet but it’s around 5/16” from top of air tube to bottom of barrel so if you center a 1.2” moderator you just don’t have the clearance. Maybe I am wrong but looking at my picture and the width of a moderator even the slimmest ones I am not sure I would have enough clearance, if I did then I would just grab the slide on adaptor from Donny and the slimmest mod he has. Even taking the bark out would be extremely helpful this thing is louder than a .22 rim fire shooting sub sonic lol seriously it’s loud but a laser too for price. So I’m not sure if TKOs have a smaller diameter or not?
UPDATED!
Oh I see the spacing between your tube and barrel is quite small! This may just work with an adaptor from Donny. What is the measurement between your tube and barrel if you can let me know I’d appreciate it! I don’t have a problem buying them I just wanna know they will work! Lol ?
Thanks but I am thinking I don’t have enough space for any moderator. I haven’t measured with a caliper yet but it’s around 5/16” from top of air tube to bottom of barrel so if you center a 1.2” moderator you just don’t have the clearance. Maybe I am wrong but looking at my picture and the width of a moderator even the slimmest ones I am not sure I would have enough clearance, if I did then I would just grab the slide on adaptor from Donny and the slimmest mod he has. Even taking the bark out would be extremely helpful this thing is louder than a .22 rim fire shooting sub sonic lol seriously it’s loud but a laser too for price. So I’m not sure if TKOs have a smaller diameter or not?
UPDATED!
Oh I see the spacing between your tube and barrel is quite small! This may just work with an adaptor from Donny. What is the measurement between your tube and barrel if you can let me know I’d appreciate it! I don’t have a problem buying them I just wanna know they will work! Lol ?
Upvote 0
Just measure from center of barrel to top of air tube. If greater than 0.6 inches you’re good to go. What is diameter of barrel?
Upvote 0
@Centercut ??
Wow your right, I have no idea why I over looked that lol. But yes it would just barely squeak by. Thank you!
Wow your right, I have no idea why I over looked that lol. But yes it would just barely squeak by. Thank you! Upvote 0
Half of the barrel diameter plus the distance from the bottom of barrel to top of the res tube x 2 will equal max diameter the ldc can be with zero clearance . Just looking at the pic looks like there is around 5/8 (.625) from centerline to the tube so the 1.2 inch od would be about as large as you can go , but the calipers will tell you for sure .
Upvote 0
@groundhog I will look today when I get off work. I wonder if the 1.22 Tanto, KOI will squeak in there.
Upvote 0
If you want to make sure, just fill out a contact form online at DonnyFL.com and ask him. He will most likely get on the phone with you. And he will get you sorted.
Bob
Bob
Upvote 0
Here's a DonnyFL adapter for my Benjamin Maximus 22. I can use any suppressor he sells with 1/2" UNF threads.
If your barrel has a shroud, maybe he has an adapter that will fit the shroud like on my FX Wildcat. The KOI and Tanto attach directly to the shroud with no adapter needed.
If your barrel has a shroud, maybe he has an adapter that will fit the shroud like on my FX Wildcat. The KOI and Tanto attach directly to the shroud with no adapter needed.
Upvote 0
@Bob_O yes it has a shroud it it’s square lol, and I’m just going to trim it back to meetup with the slip on adaptor. If I have the clearance I will make my shroud work no problem. It’s just plastic. I’m pretty sure I’m just going to barely squeak by with this lol !
Upvote 0
Well, get a very accurate measurement of the clearance before you order. Also, if the barrel sags any under weight, you have to take that into consideration if it is free floated.
Upvote 0
@bob_O thanks bob ,
I talked to Donny FL and a couple other guys and we all agreed my best bet would be a TKO due to their smaller diameter and the fact that they slip right on. I am willing to just take the bark out of it and I believe the TKO will do it I’ll be sure to follow up with a video with and without it and give my thoughts.
Most of all I want to thank everybody that helped me out on here you guys are always super helpful and that’s what makes this industry the best.
I talked to Donny FL and a couple other guys and we all agreed my best bet would be a TKO due to their smaller diameter and the fact that they slip right on. I am willing to just take the bark out of it and I believe the TKO will do it I’ll be sure to follow up with a video with and without it and give my thoughts.
Most of all I want to thank everybody that helped me out on here you guys are always super helpful and that’s what makes this industry the best.
Upvote 0