Hard for me to let this one go, but I’m being honest with myself in the solid fact that it truly never gets used to its full potential. The other day I asked myself how many rounds I’ve put thru it since acquiring it, and an honest guess would be about 15 whole mags worth of shots, so at around 255 shots(the 30 caliber mags on these are 17, all others 19). Most of those were times when my none pcp hobbyist friends came over and I’d let them entertain themselves by unloading 17 shots in less than 4 seconds in full auto. The final straw was me trying to load it the other day. I lost the feeling in my first three fingers from a 2021 cervical neck fusion, and I keep dropping pellets while trying to load this. Very frustrating.
I bought this beauty thru the classifieds, but it was brand new, unused, when the owner sold it to me. He unboxed it upon delivery just to post pics of it to sell, so I consider myself the true first user of this gun.
I recently set the tune at 860 fps from the 965 I had it at. If you’ve never tuned one of these it is the easiest platform to tune, just turn one knob CW or CCW while shooting thru a chronograph. The regulator has never been touched as reccomended by the factory. It’s never been out of my garage where it’s always been shot from. it’s truly been neglected by me just hardly using it. Other than the factory recall on the full auto toggle lever that AOA replaced, it’s been 100% flawless in function and leak free. It’s been kept at the just under the factory spec fill pressure setting of 250 bar in all the time I’ve owned it(230 bar is what I store all my unused PCP’s at, which is to allow for temp fluctuations)
I’ll post two links that are treads I started on this gun showing all I’ve done to it, and post up current pics by tomorrow. Current upgrades are a complete stainless fastener conversion. A DFL adapter so any 1/2-20 threaded moderator can be used, a secure method to make servicing the barrel off of the gun much easier when replacing, and a 3D fabricated custom adapter so a Saber Tactical rear monopod could be used for bench shooting.
I have the original o ring set from the factory along with a complete set enough to reseal the entire gun at least 25 times, a 700cc bottle, and the K&L custom shoulder butt attachment that I never used and it’s still in its original box, an Ergo deluxe tactical grip with palm shelf, and finally a REKON Gen 2 picatinny to ARCA adapter so it can be used in your favorite ARCA mount.
All the factory pieces like the original hand grip, fasteners, etc, will be a part of this sale. It will ship in its original factory case and box from AOA. It will also come with the original owners manual and misc paperwork.
Disclosure- the bottle has decals on it which are easily removed, and the gun case is labeled stating what gun fits in that case, and is written with a silver sharpie.
The athlon scope and mount is not included in this sale. Asking price will be $1650, which covers shipping. I accept PayPal in F&F or G&S, in which the buyer would cover the fees. It shoots the 44.75 Haydes the best.
Here are my two treads on my initial set up of this platform-
www.airgunnation.com
www.airgunnation.com
Current pics to follow:
Pics are here- does not come with scope, scope mounts, or the STO Faux moderator wrapped in red vinyl. It will come with the factory mod and the DFL adapter so you can mount any 1/2-20 threaded mod.
The decals I can remove before I ship
I bought this beauty thru the classifieds, but it was brand new, unused, when the owner sold it to me. He unboxed it upon delivery just to post pics of it to sell, so I consider myself the true first user of this gun.
I recently set the tune at 860 fps from the 965 I had it at. If you’ve never tuned one of these it is the easiest platform to tune, just turn one knob CW or CCW while shooting thru a chronograph. The regulator has never been touched as reccomended by the factory. It’s never been out of my garage where it’s always been shot from. it’s truly been neglected by me just hardly using it. Other than the factory recall on the full auto toggle lever that AOA replaced, it’s been 100% flawless in function and leak free. It’s been kept at the just under the factory spec fill pressure setting of 250 bar in all the time I’ve owned it(230 bar is what I store all my unused PCP’s at, which is to allow for temp fluctuations)
I’ll post two links that are treads I started on this gun showing all I’ve done to it, and post up current pics by tomorrow. Current upgrades are a complete stainless fastener conversion. A DFL adapter so any 1/2-20 threaded moderator can be used, a secure method to make servicing the barrel off of the gun much easier when replacing, and a 3D fabricated custom adapter so a Saber Tactical rear monopod could be used for bench shooting.
I have the original o ring set from the factory along with a complete set enough to reseal the entire gun at least 25 times, a 700cc bottle, and the K&L custom shoulder butt attachment that I never used and it’s still in its original box, an Ergo deluxe tactical grip with palm shelf, and finally a REKON Gen 2 picatinny to ARCA adapter so it can be used in your favorite ARCA mount.
All the factory pieces like the original hand grip, fasteners, etc, will be a part of this sale. It will ship in its original factory case and box from AOA. It will also come with the original owners manual and misc paperwork.
Disclosure- the bottle has decals on it which are easily removed, and the gun case is labeled stating what gun fits in that case, and is written with a silver sharpie.
The athlon scope and mount is not included in this sale. Asking price will be $1650, which covers shipping. I accept PayPal in F&F or G&S, in which the buyer would cover the fees. It shoots the 44.75 Haydes the best.
Here are my two treads on my initial set up of this platform-
LCS finally coming together
you’ll have to either provide a design sketch such as this or give the measurements(all as shown). Don’t use mine directly, either, cause every gun is going to be different in something Thank you. I'll have to wait to get the measurements then.
www.airgunnation.com LCS SK19 now a steady Eddie on the bench!! Shout out to ORION!
Decided to show some love to the LCS, and put away the impacts for a bit. One of the things I knew I’d miss while shooting on the bench is one of my favorite additions, the saber tactical rear monopod. Donny sells spare adapters meant to Mount onto other guns with the ST adjustable butt stock...
www.airgunnation.com Current pics to follow:
Pics are here- does not come with scope, scope mounts, or the STO Faux moderator wrapped in red vinyl. It will come with the factory mod and the DFL adapter so you can mount any 1/2-20 threaded mod.
The decals I can remove before I ship
Last edited:
