I ordered a YH from amazon. The only air rifle I have is a Crossman Woodswalker pistol. A gent told me the YH will fill the WW in about 2 minutes. Not sure about that yet but if it does would I even need to run the water cooling pump? I probably will for safety sake, but just wondering. TNX. Brian Smith
YH and woodswalker
- Thread starter briansmith
- Start date
Hi Brian
Randy here.
I would run the water pump every time. But I don't think the extra large gold filter is necessary if only filling the rifle direct. that's how I used mine and never had an issue but I always used the gold filter when filling tanks. HTH
Randy here.
I would run the water pump every time. But I don't think the extra large gold filter is necessary if only filling the rifle direct. that's how I used mine and never had an issue but I always used the gold filter when filling tanks. HTH
Upvote 0
My YONG HENG tops off even larger rifle cylinders in just over a minute. Not familiar with the WW you are referring to but well under 2 minutes should be seen.
Upvote 0
It'll take longer to fill if you add the big gold filter in line but at least you'll have drier air that has less oil in it. Still won't take long.
Glenn in Texas
Glenn in Texas
Upvote 0
Hey guys can you put a link for the gold filter? Im looking to get something for my air venturi compressor. Thanks
Upvote 0
I have the Prod and the YH will do the job in less than 1 min, check this, very important
https://www.airgunnation.com/topic/yong-heng-compressor-tips-compilation/
https://www.airgunnation.com/topic/yong-heng-compressor-tips-compilation/
Upvote 0
To add to my above post, I have a Diablo filter with the YH and it still fills guns in about a minute.
Upvote 0