FX zan .25 33gr

[babbando]

hi all im new here so go easy
i have a new m4 sniper 700mm barrel 1.24 twist rate and received 6 free boxes of zan .25cal 33grain and was wondering if anyone has an impact similar and what speeds they are having the most success .reg pressures and fps and will they be accurate at 100 yards

 

[$p00kygH0ST]

hi all im new here so go easy
i have a new m4 sniper 700mm barrel 1.24 twist rate and received 6 free boxes of zan .25cal 33grain and was wondering if anyone has an impact similar and what speeds they are having the most success .reg pressures and fps and will they be accurate at 100 yards

I imagine you might struggle a little.
My superior 1:24 shotgunned them. My 1:16 puts them through one ragged hole at any speed. Just my experience. Everyone seems to find unique results. Good luck.

 

[JaceSpace1369]

hi all im new here so go easy
i have a new m4 sniper 700mm barrel 1.24 twist rate and received 6 free boxes of zan .25cal 33grain and was wondering if anyone has an impact similar and what speeds they are having the most success .reg pressures and fps and will they be accurate at 100 yards

You will need the 1:16 twist heavy barrel liner

 

[babbando]

thanks

 

[babbando]

You will need the 1:16 twist heavy barrel liner

ok thanks

 

[$p00kygH0ST]

You will need the 1:16 twist heavy barrel liner

thanks

If you do end up buying a slug liner. Make sure you're buying new stock 1:16 liner, a lot of places still have the 1:18 superior "heavy aka slug liner". Avoid this, it'll be better than 1:24 but 1:16 is what you want.
Utah Air for sure, or any site that specifies.

 

[babbando]

If you do end up buying a slug liner. Make sure you're buying new stock 1:16 liner, a lot of places still have the 1:18 superior "heavy aka slug liner". Avoid this, it'll be better than 1:24 but 1:16 is what you want.
Utah Air for sure, or any site that specifies.

thanks ill request it

 

[babbando]

thanks ill request im in australia might have to wait

 

[$p00kygH0ST]

Actually, you might be right. . I'm seeing nothing but 1:18 on the international stuff.

https://utahairguns.com/product/fx-stx-slug-liner/ this is the one
Unless you're able to get it shipped from here

 

[babbando]

I imagine you might struggle a little.
My superior 1:24 shotgunned them. My 1:16 puts them through one ragged hole at any speed. Just my experience. Everyone seems to find unique results. Good luck.

thanks

 

[babbando]

Actually, you might be right. . I'm seeing nothing but 1:18 on the international stuff.

https://utahairguns.com/product/fx-stx-slug-liner/ this is the one
Unless you're able to get it shipped from here

good work

 

[babbando]

Actually, you might be right. . I'm seeing nothing but 1:18 on the international stuff.

https://utahairguns.com/product/fx-stx-slug-liner/ this is the one
Unless you're able to get it shipped from here

shipping to expensive

 

[babbando]

thanks

what speed were you shooting with?

 

[Firewalker]

hi all im new here so go easy
i have a new m4 sniper 700mm barrel 1.24 twist rate and received 6 free boxes of zan .25cal 33grain and was wondering if anyone has an impact similar and what speeds they are having the most success .reg pressures and fps and will they be accurate at 100 yards

I'll read all the posts before mine later but 1:24 is a great pellet liner but a poor liner for stabilizing slugs.

 

[aircare]

i shoot these out of a 350mm alpha precision barrel in my leshiy 2 which is a 1:16. very accurate. i have a 600mm on the way and hope to bump up to the 38 grain. but yes youll have way better luck with the heavy liner

 

[Ooter Outdoors]

hi all im new here so go easy
i have a new m4 sniper 700mm barrel 1.24 twist rate and received 6 free boxes of zan .25cal 33grain and was wondering if anyone has an impact similar and what speeds they are having the most success .reg pressures and fps and will they be accurate at 100 yards

Hey fellow down under shooter.
I’ve got the same rifle and had similar queries so emailed Zan direct.
His reply was aim for around 980 fps +- 15 for best accuracy with 37 and 41 grain slugs but he did say it should also be possible for good accuracy with slugs 30gn and up, not so much with 26.5 and 28 for laser accuracy. This was all prefaced on a factory rifle with no mods at all.
I’ve got a sample box but haven’t got to testing with them yet.
Regarding the liners, I believe there’s a parts shipment coming in from FX in the next week or two.
You could give AirGunSlugs Australia a call and see what they have on back order, Wayne is pretty good to deal with.
Otherwise you could try ordering from HUMA and get an import permit for the liner when it arrives (if customs intercept it).
Good hunting.

 

[babbando]

Hey fellow down under shooter.
I’ve got the same rifle and had similar queries so emailed Zan direct.
His reply was aim for around 980 fps +- 15 for best accuracy with 37 and 41 grain slugs but he did say it should also be possible for good accuracy with slugs 30gn and up, not so much with 26.5 and 28 for laser accuracy. This was all prefaced on a factory rifle with no mods at all.
I’ve got a sample box but haven’t got to testing with them yet.
Regarding the liners, I believe there’s a parts shipment coming in from FX in the next week or two.
You could give AirGunSlugs Australia a call and see what they have on back order, Wayne is pretty good to deal with.
Otherwise you could try ordering from HUMA and get an import permit for the liner when it arrives (if customs intercept it).
Good hunting.

thanks mate

 

[Chukar60]

Not an Impact, but I am shooting them out of my 600mm 25 cal. with the 1:16 liner at 1010 fps and they are very accurate.
You should be able to get to that velocity easily with the 700mm Impact M4.

 

[babbando]

Not an Impact, but I am shooting them out of my 600mm 25 cal. with the 1:16 liner at 1010 fps and they are very accurate.
You should be able to get to that velocity easily with the 700mm Impact M4.

thanks

 

[Rich_B]

I shoot the .25 35 gr out of a 24 twist around 975 with good results. By good, I mean 1/2” to 3/4“ at 50 yds. I’m slowly switching to the Nielsen 34.9 mainly for cost, but haven’t given up anything in the accuracy department yet.