Umarex Zelos pics ..
- Thread starter Perle
- Start date
There's a seller on eBay with tungsten hammers for the Zelos/M60B. He also has a TI bolt in .25. I sent him some measurements for my .22 bolt and he sent me one to test out. I'll post the results once I get it.
Upvote 0
Replaced the moderator with the DonnyFL Ryu (added 2 extra baffles to quiet it down a tad more) which shortened the OAL from 36" to about 34". Also added an offset scope mount to help with the ridiculously short eye relief on the Discovery scope.
Upvote 0
Back when I had mine, mine was 8lbs 12oz.Yeah. I thought so.... PA shows it as 6 lbs, so that is why I asked.
Upvote 0
Duracoat Oxide black and electric purple did this
For a client. They did not like bottle so went to tank.
For a client. They did not like bottle so went to tank.
Upvote 0
You guys are making me jealous. @Firewalker is fabricating a compact .25 for me right now. Or at least I hope he is, haha. I haven’t heard anything for about a week.
I also have an M60B in .30 that I’m waiting for a caliber change kit on to change to .22
The hammer spring should be the same in both right? I’m wondering if I can do the spring mod in the M60 and it will work the same in .30 and .22
Obviously I would need to adjust the reg but aside from that what do you guys think?
I also have an M60B in .30 that I’m waiting for a caliber change kit on to change to .22
The hammer spring should be the same in both right? I’m wondering if I can do the spring mod in the M60 and it will work the same in .30 and .22
Obviously I would need to adjust the reg but aside from that what do you guys think?
Upvote 0
Upvote 0
Ditto on the wait from FIrewalker . It took About 3 weeks
for my “Zelcom “to arrive.
One of my favs in my lineup for sure !
for my “Zelcom “to arrive.
One of my favs in my lineup for sure !
Upvote 0
Yeah I’m being patient. Not in a huge rush especially since I had to get another .25 because there were no .22 available. He’s usually pretty quick to respond to questions I have, I just haven’t heard anything from him for a week or so. Hopefully he’s just on vacation or something haha.
Upvote 0
I'm here, I've been taking classes, learning CAD and sourcing Zelos for conversion. Ill be answering PM's today.
Upvote 0
That rail has an integrated arca rail with Mlok slots down the sides and bottom. I redesigned the trigger guard to provide a more rigid mounting point. The rail is 11.5 inch long from the back of the trigger guard to the end of the rail. This is the first machined prototype so a few things might change cosmetically speaking, but the rigidity and function are spot on what I was looking for. In this version it's a two piece assembly, but the discussion for making it as a single unit has already started. If you look at the photo close enough you can see that it has arca rails bolted to the lower mlok slots because we had to order some tooling to finish milling the arca rail. Works perfectly for pictures, proof of concept, and design feedback.
Last edited:
Upvote 0
Blackdog 899 is the man , and Firewalker's work for the Shorty Zelos is kick ass. I want a shorty Zelos with 2 small side by side bottles ha seen one of those. Lol. I swear I try to keep up with you guys , but you are way above my league. FX barrel mod ?
Anyway here is a pic I saved , but no longer have it like this. Switched it back to stock no guage in plenum.
Anyway here is a pic I saved , but no longer have it like this. Switched it back to stock no guage in plenum.
Last edited:
Upvote 0