They go as small as 3mm. https://www.amazon.com/Socket-Metri...=3mm+ball+plunger+screw,tools,129&sr=1-3&th=1
Upvote 0
Love the name you chose!! Lol!! I have the chinese version of this mount, and understand the basic principle of things. The only thing I have problems with is...Is it just 1 grub screw on 1 rail? Or do you want to drill/tap and put a grub screw on all 4 corners of mount?? Feel free to email me BT. My email is [email protected]. THANK YOU!!when adj. the screw squeeze the mount , if you can feel the screw it is too tight if you can't feel it and there is no wiggle then it is right .
Yes i found 4MM set screws with nylon tips but not all nylon 4 MM set screws
two cornersLove the name you chose!! Lol!! I have the chinese version of this mount, and understand the basic principle of things. The only thing I have problems with is...Is it just 1 grub screw on 1 rail? Or do you want to drill/tap and put a grub screw on all 4 corners of mount?? Feel free to email me BT. My email is [email protected]. THANK YOU!!
either end just both same end , one each side . Worked for me , no wiggle , tighten just to stop wiggle not to impede travelThe ones at battery end of base?
Thank you!! Happy Fathers Day!either end just both same end , one each side . Worked for me , no wiggle , tighten just to stop wiggle not to impede travel
Hi TJ! Does this resemble the accurized version? Im trying to work some of the play out of mine as well. TIA!I have Hector's accurized versions on all my TX200 rifles. I am using scopes that are for the most part irreplaceable, like the Premier modified Leupolds, so I just want to be sure the scope lasts. Off the shelf, these mounts have too much movement, leading to POI shifts; found that out the hard way. Hector's mount have no POI shift and work exactly the way you would hope a zero recoil mount would work.
Tim