Crosman custom 2400kt shroud muzzle break silencer

TKO

Visit hillairguns.com and you can get the 7/16 barrel adapter and baffles and end cap and I would say he also makes custom length tubes for it. Everything you need is on his site. I built one recently for a Crosman custom shop 1300 and it came out very nice. I had my tube made by Jim Gaska of wickedairrifles but bought all the assorted other parts from Tim hill. 

Having said that, I’ve had no reply from jim gaska recently while searching for a barrel for another project, so I assume he is busy at this time doing his normal job. So... check out hillairguns. He does very fine work.

This type of shroud is a more low profile shroud that isn’t bulky or anything. Your other options are the tko as mentioned above or buy a thread adapter and a small moderator like the koi from donnyfl. 

Best results would probably be seen from the donnyfl, but the custom shroud you can put together from hillairguns will work just fine also. 

TKO airguns tho these days many many people are selling them but am familiar with the 2400 & TKO, works very well.



John

I have personal experience with a DonnyFL Tanto and a TKO installed on my 2400KT. The TKO is definitely the way to go. 

TKO IS AWESOME!

TKO has them.

...........mike atg tko.. ive gotten maybe 20 from him (other barrel softener , too) ....stage 5 for disco in case you try a maximus , or discovery soon..... idk if .22 or .177 is best for a .22 2400kt , but i usually get .22 in case i go with a .25 barrel on the co2 active 2400/2250 types. - paul.