NEW or Custom FT Air Rifles

Nice!

The blue one is my current rig. The green one is in the pipes. All I can say about the gun is that if you don't knock down the target, it's your fault.

Well I'll jump on the Thomas Train with John and tell you about my Thomas FT Carbine. Mines setup for Open Class FT shooting 13.4 monsters at 19ft lbs. I've owned this rifle for 3 years now and has never given me a problem. This machine will consistently shoot 1/4"-3/8" 5 shot groups at 50 yds off the bumbag. I recently sent it to Jason Neal to have it checked over,resealed and.the regulator rebuilt and Jason said this about it. " ..a real 50 yard aspirin assassin with the Beasts you included. No joke, this ~1/4" (0.5 MoA) was the first attempt at grouping after the rebuild.

A great rifle quality made by a real perfectionist Mike Niksch. Now getting one of his rifles is even faster due to his new dealers/tuner network.

........... 

Hey where did you get the scope eye shade piece? I am looking for a good quality one not the cheep ones that have flooded the market.

Click to expand...

I have nothing to contribute to this thread but I can help with the eye cup piece. 

David Slade has them and I highly recommend one. Here is his webosite: http://www.airgunwerks.com/products.html

Here is one of a my custom stocks I designed with an FX bullpup that I reworked some. This setup I’ve had for about 8 months. Shoots good and fits good.

My KILLER RAW TM-1000 Custom .... in .20 cal !





My JSAR Field Target Prototype ... in .20 caliber





My Taipan Vet Field Target Custom .... in .20 cal



These just a few of the FT rifles I've reworked for my own use and competition in the last 6 or so years ... Bad to the bone all 3 of them !!!



Scott S

Would any of you like to comment on the scopes you are using? As far as what you have done to customize then to match your rifles. 

On mine the wheel is a Garima of custom size. It has an aluminum hub on scope and wheel with magnets. The pointer is from an former ft shooter. Wheeler folding scope level. Sightron SIII 10-50x60 scope.

I’m a little embarrassed.
Fanciest gun I have is a bone stock four year old BSA Mk2 in .177 topped with a Hawke Sidewinder and a JDS aluminum wheel. 

No piston love! 

TX200HC

GINB Stock

Sub MOA Systems Buttplate and Hamster

Custom Carbon fiber Cocking extension and Custom Cocking aid (not in this pic)

Falcon X50 Scope Mounted on Burris XTR Signature rings with my own Sidewheel design. 

My own Guide/ tophat w/ a 0.118" Wire 0.78" od 27 coil (+-1 coil can't fully remember)

22mm piston w/ sleeved comp tube

Shoots 8.44gr at 12fpe. 

55y group in FT position 12 shots right to left wind. 

No piston love! 

TX200HC

GINB Stock

Sub MOA Systems Buttplate and Hamster

Custom Carbon fiber Cocking extension and Custom Cocking aid (not in this pic)

Falcon X50 Scope Mounted on Burris XTR Signature rings with my own Sidewheel design. 

My own Guide/ tophat w/ a 0.118" Wire 0.78" od 27 coil (+-1 coil can't fully remember)

22mm piston w/ sleeved comp tube

Shoots 8.44gr at 12fpe. 

55y group in FT position 12 shots right to left wind. 

Click to expand...

Nice shooting Cameron! Is that a Tony Leach 22mm conversion?

I’m a little embarrassed.
Fanciest gun I have is a bone stock four year old BSA Mk2 in .177 topped with a Hawke Sidewinder and a JDS aluminum wheel. 

Click to expand...

Dave no need for feeling embarrassed. That's a great setup you have. Always be proud and own the moments you have with it! JD did my wheel too so it matched my rifle too.

Yes it's a 22mm from Tony, purchased from him about 2 years ago now. I've personally made 5 or so 22mm guns that were made by me using raw materials. Two have the HW pistol parachute seal, but the rest have a seal I purchased from Tony in them. 

-Pianogun

Excellent work and great shooting! The barrel tuner, is this for the lack of a better term a weight that can be adjusted in or out?

Cam

Kerndtc, nice springer!

Ah, giving ole Mark K a run for his money I see.