380mm or 500mm 177 caliber fx barrel can be a solid barrel or the ultralight.

Putting a larger bottle on my panthera and this rail won't work with a bottle larger then 300cc. $200TYD

Huben K1 3D printed Butt Hook with extensions and adjustable in Z direction $45 PP F&F, otherwise add 3%

Andy

Hard for me to let this one go, but I’m being honest with myself in the solid fact that it truly never gets used to its full potential. The other day I asked myself how many rounds I’ve put thru it since acquiring it, and an honest guess would be about 15 whole mags worth of shots, so at around 255 shots(the 30 caliber mags on these are 17, all others 19). Most of those were times when my none pcp hobbyist friends came over and I’d let them entertain themselves by unloading 17 shots in less than 4 seconds in full auto. The final straw was me trying to load it the other day. I lost the feeling in my first three fingers from a 2021 cervical neck fusion, and I keep dropping pellets while trying to load this. Very frustrating.

I bought this beauty thru the classifieds, but it was brand new, unused, when the owner sold it to me. He unboxed it upon delivery just to post pics of it to sell, so I consider myself the true first user of this gun.

I recently set the tune at 860 fps from the 965 I had it at. If you’ve never tuned one of these it is the easiest platform to tune, just turn one knob CW or CCW while shooting thru a chronograph. The regulator has never been touched as reccomended by the factory. It’s never been out of my garage where it’s always been shot from. it’s truly been neglected by me just hardly using it. Other than the factory recall on the full auto toggle lever that AOA replaced, it’s been 100% flawless in function and leak free. It’s been kept at the just under the factory spec fill pressure setting of 250 bar in all the time I’ve owned it(230 bar is what I store all my unused PCP’s at, which is to allow for temp fluctuations)
I’ll post two links that are treads I started on this gun showing all I’ve done to it, and post up current pics by tomorrow. Current upgrades are a complete stainless fastener conversion. A DFL adapter so any 1/2-20 threaded moderator can be used, a secure method to make servicing the barrel off of the gun much easier when replacing, and a 3D fabricated custom adapter so a Saber Tactical rear monopod could be used for bench shooting.
I have the original o ring set from the factory along with a complete set enough to reseal the entire gun at least 25 times, a 700cc bottle, and the K&L custom shoulder butt attachment that I never used and it’s still in its original box, an Ergo deluxe tactical grip with palm shelf, and finally a REKON Gen 2 picatinny to ARCA adapter so it can be used in your favorite ARCA mount.
All the factory pieces like the original hand grip, fasteners, etc, will be a part of this sale. It will ship in its original factory case and box from AOA. It will also come with the original owners manual and misc paperwork.
Disclosure- the bottle has decals on it which are easily removed, and the gun case is labeled stating what gun fits in that case, and is written with a silver sharpie.
The athlon scope and mount is not included in this sale. Asking price will be $1700, which covers shipping. I accept PayPal in F&F or G&S, in which the buyer would cover the fees. It shoots the 44.75 Haydes the best.

Here are my two treads on my initial set up of this platform-



Current pics to follow:

$2,200, Steyer Pro X. 22 caliber pellet semiautomatic air rifle in flawless condition with bipod and 1/2 UNF thread protector. Fantastic PCP shoots wonderfully and stacks pellets at 100 yards. Purchased new from Edgunwest and is still under warranty. Already have a Leshiy 2 that is taking care of my semiautomatic PCP itch so I'm letting this go.

Local pickup in Layton UT. Or you can arrange shipping through Utah Airguns to broker the transaction.

Venmo or cash.

I am looking for a Impact 500mm .177 or .22 stx barrel kit with shrould and probe
Also interested to a top rail and bottom arca.
Thanks.

I’m looking to buy a .177 FX impact , 500 mm liner.
Please let me know if you have one

Brad
Salt lake

Looking for a Regman 2.0 external regulator in good working order.

Piecing together my tethering setup

Mike

My rifle didn't like them. $77.00 OBO Shipped

Brand new. Never used. Sold gun before I got around to converting it. $85 shipped within CONUS. Prefer PPFF, if G&S please add the fee. Ships via Pirateship either UPS or USPS. DM me any questions.

Taipan Veteran 3D printed Butt Hook with extensions and adjustable in Z direction $45, $40 PP F&F,
, otherwise add 3%

Andy

Looking for a 28inch barrel for my Ghost in .22, specifically the 2B with a 1:17.7 twist rate. If anyone has one available and would let it go let me know. Thanks!

Alright, I took 5 shots of each ammo, back to back.
1st 5 shots Javelin 2 40gr .250
2nd 5 shots Javelin 2 40gr .251
3rd 5 shots VK 32.8gr .250
4th 5 shots Apolo 40gr .2505-.251

The gun is very consistent for not having a regulator, and it is also very accurate.

I started shooting with the tank at 250b at the end of those 16 shots, the tank was at about 180ish bar.

This ishe best gun I've had in my hands but it simply does not fit my style of shooting. It has a 23 3/4" long barrel.

I have not tried shooting pellets out of this, when I first got it, I tried shooting the 32.8 grain Varmint Knocker slugs, and the first five shots were 1042, 1042, 1046, 1046, 1042. So needless to say, the only pellet worth trying may be the seneca 43's but they may be too long to fit the mag.

The gun only comes with one magazine.

It is in pristine condition and it would come in a long and hard carry case. I'd be interested in a vulcan 3 500mm, uragan compact, krait/katran hp

Sell for $1300 split shipping, obo

Mod and scope not included.

.OEM Leshiy2. .30L bottle lightly used
08/21 born on date

for sale

200 shipped
PayPal. FF or pay fees

Looking for a Weihrauch HW77 full length not k version in 177 cal. Located in Maryland urban area and hope shipping is making sense. Thank you for your attention!

FX Impact M3 .25 500mm Compact with upgrades $1700 TYD
Paid over $2700 to my door when it was new with upgrades.
I purchased this on the 16th of November of 2021 from Joe Broncano TopGun-Airguns.
The bottle was exchanged for the 580cc 300bar Joe Brancano Bottle at the time of purchase.
DonnyFL Koi installed.
Carbon Fiber 500mm barrel sleeve purchased from UA and installed.
This Impact has been well taken care of.
28-shot factory magazine.
The factory barrel end cap is also included.
Also Including two speed loaders that I 3d printed for it.

PayPal

Brand new PP700SA have both barrels to go with it. Comee with red/green dot sight. $300 shipped in lower 48.

New lower price
Beautiful walnut Caiman X MK2 .25 comes with two magazines, fill, probe, manual, and soft carry case. my loss your gain, this is in like new condition. No issues or leaks!
$850 includes shipping to Conus
Not interested in any trades!
PayPal, friends and family or Venmo accepted.

Selling my Renegade .25 HP with a DonnyFL Ronin and Athlon Talos 3-12x40 scope. I am the original owner. The rifle is currently set up for left handed shooter, but can be switched to right. Very accurate gun with the electric trigger. Can sell with or without scope and moderator. Selling because I dont go shooting enough, just collecting dust.
Any question feel free to contact me.
$1200 or reasonable offer plus shipping

I'm looking for a Element Max in 50cal to try out, I have alot of different scopes, Donntfls and airguns to trade for the right rifle....Thanks Terry

I have a very nice and unique Quackenbush 25cal with a 16" barrel with his 1/2x20 adapter, scope and folding stock not included but can be bought. I've haven't shot over 100 pellets or slugs through it, Looks new holds air forever. Asking $600 shipped.....Thanks Terry

i am interested in the NOE .30 cal 68gr boat tail slug mold (with HP pin option)
300-68-FN-BI3 4 Cavity RG4 BT

a version with 2 cavities would also do.

since i am located in EU (finland), most likely overseas shipping is required.


thank you.

I think the part number is
10339

Looking to buy the 3 tool pieces used to work on the Evol and Slayer. I have attached a pic of the 3 tools from a prior sale. Thanks, -Tony

Let me know what you have.

Can upload pictures and more info through messages.