Looking at buying a shoebox compressor or altaros booster pump.. my number is 601-641-1504

Looking to sell my .25 caliber Raw
I don’t need two .25 cal. Allen Z built the fully shrouded moderator and barrel (very quiet)
He also built a barrel which he takes a FX barrel liner and sets in a tube with some type of resin. (Very accurate)
I’am asking $1900 firm I will not take less it’s to good of a gun.
Gun comes with monopod and picatinny Bar
Gun does not include scope or tripod.
I want to purchase a compressor.
The groups are 12 shots taken at 105 yards that’s 24 shots in a row. As you can see from the photo after the first 12 shots the gun really comes into its sweet spot and makes a ragged hole
I will ship to the lower 48.

I'm selling my Vulcan 3 700mm .30 cal with Walnut stock. Purchased new from Talon Tunes, I've shot it a little bit and kept it in pristine condition. There is a small nick on the bottom of the pistol grip as seen in the photo. A Huma regulator has been installed and currently 44.7 gr. pellets are 951 fps and 50 gr. slugs are 898 fps. Comes with all the original factory accessories as seen in the photos, test card from Talon Tunes, soft case, manual, factory regulator with spacer along with the Huma spacer and 2 packs of AVS slugs sized .306 in 62.5 gr. and 50gr. that I was going to set the gun up for.

I am asking $1150 shipped to the first 48 states. Will be double boxed. Prefer Paypal F&F.

Selling the first PCP I got about a year and half ago so still has over 3 years warranty left. I have since moved to shorter guns (carbines,bullpups) as a preference so I haven’t shot this since last year. Holds air forever and no marks, scuffs anywhere. And very accurate.
Comes with everything pictured.
Benjamin softcase
Benjamin sling
4 mags
CVLIFE 3x9x40 scope with monstrum dust caps
Barrel band
DFL mod adaptor, plus original end cap( shroud can be removed and barrel is threaded 1/2 x 20.)
Upgraded to a Caldwell pic adaptor, plus stock pic rail.
$450 includes shipping CONUS, PAYPAL

Want To Buy: Vector Veyron 30mm scope rings or ring ... need parts but will take the set if the price is reasonable. These are the scope rings included by Vector Veyron.

I put this kit together to shoot Field Target. It looks and shoots exceptionally. This is an S500, not 510. So, this has the wider breech like an HFT500 but can shoot .177 at 20fpe easily whereas the HFT version is limited to 12fpe. The sweet walnut stock was professionally oiled with 6 coats and really stands out. I had a walnut hamster custom made to complement the stock by a guy in England that specializes in them. Mounted on a ball joint, the cheek rest is the most adjustable out there. If you want to switch to benchrest over the winter, it's an easy change to the tactical stock. Two fill fittings, the original barrel tip, owners manual and original box are included. (A 4-16x50 scope is included if you buy the full package but it's not the one shown.)


$800 for rifle and walnut stock !
$1000 shipped insured for rifle and both stocks and a 4-16x50 scope!
$250 for tactical stock only

PayPal FF or +4%, or postal /bank check

Selling a nice 177 that has had the hammer spring adjusted, trigger work and cleaned barrel. Very accurate as it is had a project in mind for it but time is running thinner and thinner.

Comes with magazine.

Shot string 780fps-815-780fps for 90 shots.

$315 plus shipping.

camsprecisionairguns(@)gmail.com

Or

(NINE16) 531-2349

Hello,

I'm selling a daystate wolverine HP R that is an excellent condition. It is regulated and in 25 caliber. Overall condition of the rifle is stellar and it functions wonderfully. Two magazines and a single shot tray are included as well as the Sumo.

Selling the rifle for $1,500. $1300

Also can be included:

Sightron S-Tac 4-20x50 MH4 FFP $450 w/ rifle or $500 by itself.

Please Call or text: (nine16) Five31-2349

Or email

camsprecisionairguns(@)gmail.com

This is a custom grip form a great wood worker Warren Snaith paid over $250 for it but sold the L2 and would like this to go to someone that will enjoy it. $150TYD

I am looking for a FX wildcat mk3 .25 700mm barrel kit.

I have this notos that I am letting go which is stock and not messed with. Comes with factory box, the 2 mags, fill probe, and will include the 3d printed clamp. $225TYD any questions just ask. *Note only the notos is for sale nothing else in the picture*

No rust in excellent condition. Small amount of paint ware from contact with stock (see pics) . What looks like a long scratch in one pic is just the lighting, there is no long scratch! These are no longer available from crosman. This one had a nice coating of silicone grease inside. NO RUST!!! inside or outside... $100.00 Shipped. This includes PayPal fees, shipping cost, tracking number, insurance. $100.00 To your door

Everything needed to have a dual caliber Marauder. If you have a .22, all you need to swap, is the bolt and barrel. The breech and bolt are for gen 1 only. This barrel will work with both gen 1 & 2. The breech, and bolt are no longer available from crosman. I will seperate! Make offer $80 Shipped to your door! This includes PayPal fees, insurance, tracking number, signature conformation.

I am intrested in all parts and dead or working whole guns. Please PM me with what you have. Thank you

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but if we've done prior transactions I will accept check or USPS MO.
• CONUS shipping is included in the asking price.
• I go based on PM timestamp.
• Please - no trade offers for this sale.

I have a solid reputation on AGN as an excellent seller and buyer. Can provide member references upon request.

For sale today is an extremely accurate little pesting/plinking combo. First is a BRK Pathfinder in .177 tuned to shoot the H&N Barracuda Match 10.64gr or newer Benjamin 10.5gr single die right around 800fps and will post tight groups out to 45-50 yards. I purchased the air rifle new from AoA in early 2023. It's only be shot indoors or off a bench, so no field use scrapes or marks. Comes with 2 - 13rnd magazines - the rifle comes with one and the 2nd was an extra purchase from AoA for $110.

Paired with the Pathfinder is a Pard DS35-70 LRF Day/Night Scope. Great scope for the price. Built in IR light. The LRF pairs with the internal Ballistics software to provide nice on the fly ranging and holdovers. I've setup the Ballistics for the Benjamin pellets and was able to accurately hit different targets around the around with no problems. The Pard is mounted with Eagle Vision INS-30 30mm adjustable pic scope rings.

Ideally I'd like to sell this as a package and I have priced the package deal aggressively as such. I will also sell Pathfinder and Pard/EV Rings separately.

Asking Prices (CONUS Shipping Included):

- BRK Pathfinder .177 w/ Pard DS35-70 Scope and EagleVision Adjustable Rings. Includes 2 Magazines. PRICE: $1,850
- Pard DS35-70 Scope and EagleVision Adjustable Rings. PRICE: $550

*** Pard scope sold - Pathfinder is still available. ***

- BRK Pathfinder .177 w/ 2 Magazines and all stock accessories. Will come double boxed with original packaging.
New price: $1795 + $109 = $1904

Asking PRICE: $1,400

Looking to swap my New Arken Sh4 4-16x50 moa for a SWFA 20x42 SS - Mil-Quad Reticle,.1 MIL Clicks, will also look at 16x as well Rear Focus scope. They are just about equal in cost arken being just a bit more. If you have one in excellent shape you would like to swap let me know thanks.

Would like to deal with members with positive feedback. My feed back is good as well.

Picture for attention.

This is a very special little compact Mutant. The barrel in this thing is EXCELLENT! It shoots everything from 16gn JSBs / Hades up to 34gn slugs lights out.

It has a custom valve and hammer system, the valve is also compatible with the Taipan Veteran. Cocking lever is also reversible.

Efficiency & versatility - I had it shooting JSB Monster RDs at 937FPS over the winter (very easy to tune) with an ES of 1, but I re-tuned it for JSB Hades with it's monster shot count. The shot count really shines with 16gn ammo (JSB Hades, Jumbos, H&N, etc), and I've been able to get over 200 shots per fill at 12FPE (>150 shots at 15FPE, and 64 shots at 25.5FPE). I was able to shoot the Monsters and 25gn H&N slugs around 50FPE around 190bar, but the custom hammer system can work the valve at higher pressure if that's your thing.

These Mutants use 12-shot mags vs. 10 in the Veterans. There's nothing quite like these Ukranian-made Mutants. You get the impression / feeling like they were hand-built by someone who cared!

Durability & reliability - It's also one of the most durable bullpups that I've ever seen. It would make for a perfect truck gun, barn gun, and / or for all around field use. You can't really mess up the barrel since it actually stops under the forward barrel support and the factory moderator threads and sleeves over it under the support.

I've taken over 100 squirrels with it and about twice that in starlings and sparrows. These Taipans are very reliable and I serviced the rifle recently (5/25/2024) using high quality o-rings with proper grease. It should stay sealed for many (many) years to come.


Modifications and included components:

• Custom indestructible, industrial strength valve system (tested with reg wide open at 250bar with a sledgehammer hammer system)
• Bored out / tapered the block porting
• Custom grade 5 titanium lever handle with dual 1/4" set screws
• Custom 3-piece \hammer spring tension (HST) adjustment knob - marine brass with brass and Delrin preload / spring guide bushings + heavy hammer weight and heavy custom spring (needed for >170bar tuning)
• DonnyFL HST with custom spring and Delrin spring seat (for <170bar tunes)
• Huma regulator (springs max at ~195bar)
• Magpul MOE bipod / accessory rail, screws are threaded into the rifle and affixed with embedded T-nuts (very strong, screws and rail are removable)
• (2) 12-shot factory magazines
• (1) factory single shot tray / SST
• Assortment of custom hammer springs
• 1/2"-20 UNF thread for moderator attachment - not really needed, but it's there anyway!
• (1) magazine holder
• Upgraded Wika gauge
• Original packaging

Optional:

• Nylon padded carrying case with two side zipper pockets from EDgun (add $45)
• (2) additional 12-shot factory magazines: $40/ea
• I have an optional Taipan factory aluminum mag holder set that holds (8) mags, but I also made some custom threaded Delrin attachments that allows you to run a single (4) mag holder to minimize weight: $80

Terms:

• $1250 + 1/2 shipping CONUS (no Chicago or NJ). Zelle preferred
• No trades

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but if we've done prior transactions I will accept check or USPS MO.
• CONUS shipping is included in the asking price.
• I go based on PM timestamp.
• Please - no trade offers for this sale.

I have a solid reputation on AGN as an excellent seller and buyer. Can provide member references upon request.

Selling off the remaining items from when I had my Alpha Wolf.

This sale if for 2 x .25 Daystate Magazines that will fit the Alpha/Delta Wolf or the BRK Ghost. Magazines are in excellent condition. These sell for $119 each new.
PRICE: $150 SOLD

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but if we've done prior transactions I will accept check or USPS MO.
• CONUS shipping is included in the asking price.
• I go based on PM timestamp.
• Please - no trade offers for this sale.

I have a solid reputation on AGN as an excellent seller and buyer. Can provide member references upon request.

Selling off some extra ammo I've collected over the past few years. I have way more than I need and I'm letting these go for a good deal.

***SHIPPING IS INCLUDED IN PRICE***
Pellets will be well packaged using Pyramyd Air foam rings where possible.

There's a lot of pellets here so be specific in your PM which number lot(s) you want.

2) JSB .22 15.89gr - 10 brand new tins packed in sleeves of 5. PRICE: $120 SOLD




6) H&N .22 Barracuda 18gr - 10 tins, 2 sealed sleeves of 5 tins each. Price: $50 SOLD


7) H&N .22 Barracuda 18gr - 8 new sealed tins. Price: $40 SOLD


8) H&N .22 Barracuda 18gr - 17 new sealed tins. Price: $90 SOLD



***BELOW THIS LINE ARE SOLD***
1) JSB 10.34gr - 6 new tins. All from the same sleeve of 10 tins. PRICE: $65 SOLD

3) JSB .22 18.13gr - 10 brand new tins packed in sleeves of 5. PRICE: $120 SOLD

4) H&N .22 Barracuda March 21gr 5.52mm - 12 new unopened tins. PRICE: $80 SOLD


5) H&N .22 Barracuda March 21gr 5.50mm - new unopened tins. PRICE: $45 SPF

Last time I shot it it shot fine. Sold as is. I will include a umarax pistol free with purchase. $70 shipped for both. PM or [email protected] if interested.

I am looking for a (RAI) R. Arms Innovations modular stock (RAI) for benjamin marauder. Thank you

For sale like new Kahles K525i
3000 2500 Now 2250 Shipped PayPal F&F Zelle, Venmo

Save $1150.00 from the $3400.00 on Amazon!

The magazine is like new, only test fired once, less than a full magazine shot from it. These are considered by many to be the best custom magazines for FX Impacts that offer a higher capacity. They also run really well in general. They have a removeable belt system so you can add a .25 or .30cal belt and not need to buy a totally new magazine. It's perfect condition.

It's also the made for shooting long/larger sized slugs that won't fit in regular magazines. It can fit pretty much any .22 caliber slug that exists within a range of 13mm length. The magazine holds 28 rounds.


These sell for $50 direct from Midwest Elite Airgun and usually end up to be $55-60 after shipping costs.
I will sell it for $45 shipped

Looking for a magazine and holder in .177 cal.